@stuartk -- I'm not familiar with the syncromesh vs. the Offramp, but my impression is the Offramp could make the transport a non issue. Personally, I'd get an Offramp and not have to pay or worry so much about the transport going forward. And yes, I fed a BC DAC3 VB with my Oppo and the CD2, and there was a notable improvement with the CD2 as a transport. However, and this is a BIG however, I would've loved to have heard the DAC3 VB with my Oppo with an Offramp and see how that compared. My guess is there would've been very little difference. The main reason I recommended the CD2 is that I've had personal experience with it and it really seems built to last for the long term and destroyed my Oppo as a transport. But I'd talk with Emprical Audio about your reclocker versus the Offramp and start there. Personally, I'd get the CD2 mainly because it seems like it'll last forever as a transport, then take Emprical Audio's advice on which reclocker will help your system sound its best.
Suggest Transports that can be Demo'd at home
I'm quite happy with my system (Silverline 17.5 monitors/Wells Majestic integrated/Aqua La Voce II/Jolida JD100 (as transport) but am wondering whether I ought to purchase another transport before they're no longer available.
$3000 would be my limit, budget-wise and longevity is a big concern. Used is OK, as long as unit is M.
I have two caveats which make this tough-- 1) as a rule, I don't purchase any gear I can't first demo at home and 2)
I'd ideally prefer something made in N. America. Of these two qualifiers, the second is negotiable, but not the first.
I could demo a Bryston BCD-3 from Audio Advisor, but I'm not sure it makes sense to pay for a unit that includes a DAC I won't use. Also, I came across a comment in the Forums that the Bryston has fatiguing highs-- a flaw I particularly abhor. And, it's considerable over my budget.
The Moon Neo 260D is not, as far as I can tell. possible to audition at home and I read on one of the AGon transport discussion threads that the drawer is flimsy.
The Jay's Audio products look to be very good but I didn't see anything on their site about a trial period.
A used PS Audio is a possibility, I guess, although I read that they used Oppo transports, which are no longer being made, so that's a concern from the longevity stand-point.
Any other units I should be aware of ??????????????
Thanks.
$3000 would be my limit, budget-wise and longevity is a big concern. Used is OK, as long as unit is M.
I have two caveats which make this tough-- 1) as a rule, I don't purchase any gear I can't first demo at home and 2)
I'd ideally prefer something made in N. America. Of these two qualifiers, the second is negotiable, but not the first.
I could demo a Bryston BCD-3 from Audio Advisor, but I'm not sure it makes sense to pay for a unit that includes a DAC I won't use. Also, I came across a comment in the Forums that the Bryston has fatiguing highs-- a flaw I particularly abhor. And, it's considerable over my budget.
The Moon Neo 260D is not, as far as I can tell. possible to audition at home and I read on one of the AGon transport discussion threads that the drawer is flimsy.
The Jay's Audio products look to be very good but I didn't see anything on their site about a trial period.
A used PS Audio is a possibility, I guess, although I read that they used Oppo transports, which are no longer being made, so that's a concern from the longevity stand-point.
Any other units I should be aware of ??????????????
Thanks.
- ...
- 64 posts total
soix: I found a short stereophile description of the two devices: " There is now an Off-Ramp 5 asynchronous USB converter ($1299), which now has HDMI in addition to S/PDIF and i2S output" and: " the Synchro-Mesh reclocker ($599), which dejitters the datastream for a source such as an Apple TV, Squeezebox, or CD transport". Steve was the one who actually recommended the Synchro-Mesh to me on another of my A'gon threads, so that's what I went with. Is your description of the Bel Canto as a unit that "seems like it'll last forever" based on the drive, the casework, or ???? |
stuartk OP Don’t be, my systems up there too and I use the Cambridge CXC, it’s only $600aud here in Australia, but it’s a purpose built CD transport, that has very good spdif wave form (I’ve measured and see it) and said to only have 5 ps of jitter, and looking how clean the wave form is I believe that. Here’s what Lapizator (transport guru) said about it when I showed him pics of the tests. This wave form is as perfect as it gets. The Sim Moon Neo 260D you said having a flimsy transport is that it has nothing special in the way of a transport laser mechanism, having a Sanyo SF-HD65 in it. https://www.ebay.com.au/itm/SFHD65M-SF-HD65M-HD65M-Original-New-Sanyo-Laser-Lens-Mechanism-SF-HD65/120971864496?epid=1300237646&hash=item1c2a7c29b0:g:wloAAMXQiM5RAREU&frcectupt=true So one cost $600aud and the other $4000aud, with laser/transport mech that are, well as good as each other. Some of the places you can get the Cambridge CXC from are the type of store that you can take it back to if not happy, here in AU they are in hiend stores but also in hifi chain stores that you can return to. Reviews https://www.whathifi.com/cambridge-audio/cxc/review https://www.tnt-audio.com/sorgenti/cambridge_cxc_e.html https://www.dagogo.com/cambridge-audio-cxc-transport-review/ Cheers George |
georgehifi; I was actually intimating that, as my system is relatively inexpensive, my concern about using an inexpensive transport might strike some as odd. The only two audiophile friends I have own much, much, more costly systems, so that's all I have to compare mine to. Thanks for your input re: merits of Sim vs. Cambridge. I'm pretty clue-less when it comes to knowledge of CD drives. Here, the Sim costs $2000 US but, as mentioned, I haven't found an option for a home demo. I am aware that such an option exists for the Cambridge and from more than one online vendor but I do appreciate your input! |
@stuartk @mooglie I would highly recommend checking out CEC as others here have suggested. If you want to get in touch with the U.S. Distributor, contact Nick Gowan at gowanattsounddotcompany and he will help you. I purchased a TL-1 and it has been fantastic! |
- 64 posts total