Is Pre-Amp needed


Is a preamp needed.  I run my oppo 205 direct to an MC275-6 for two channel audio and it sounds good, but am wondering how much better a pre-amp would make it sound. A pre-amp seems necessary for multiple sources, but not for just one source.  Would it just be an extra link in the chain or would it greatly improve the sound? 
lilchris9
https://www.youtube.com/watch?time_continue=377&v=Dh27E7YKN9s

I guess it depends on your definition. If your DAC/Source has a volume control then you are using a preamp. It may be rudimentary or elaborate but it is nonetheless a preamp. Some Dacs/Sources have exceptional inboard analog preamp circuitry while others may not.

For those that say they prefer the purity of no preamp, they are actually saying that they prefer the sound of THEIR source’s preamp rather than the sound of THEIR source’s preamp run through another outboard preamp.

For those with digital volume controls on their source that they prefer the sound of, they may be truncating the data. In those cases, a source with a digital volume control will typically sound better run at full volume (or the point on the source volume where data is no longer truncated) through a high quality preamp.

I have a $11k retail DAC which has a very nice analog output stage and volume control. It sounds really nice amp direct. It sounds even better through an Audio Research Reference preamp. YMMV.


 THEIR source’s preamp
???  Sorry there's no such thing!
The output buffer in the source is the same if it has a digital domain volume control or not. And only if that volume control goes below 75% of full does it start to "bit strip". 
Many hiend source counter this by have a gain setting for the buffer stage, so then the digital volume control can be used at or above 75%. And if you have one that doesn't have the buffer gain setting or digital volume control the the answer is to leave it at full up and use an external passive volume control.

I have a $11k retail DAC which has a very nice analog output stage and volume control. It sounds really nice amp direct. It sounds even better through an Audio Research Reference preamp. YMMV.
If that's the case then you don't like the sound of your source direct, and need to colour it with the AR preamp's colorations and distortions. 

Cheers George  
George, your absolute assertions are not absolute for all equipment. The ARC preamp provides more of everything, especially the layering of instruments. Put a great preamp in your system and see for yourself. If you dont like it then you have only established one data point, yours, not an absolute.

I'm a single source one input tunable listener all the way. Making any sound I want is pretty easy to do this way and I get to avoid distortion while creating any sound I wish.

Michael Green

I used to own a dual mono TVC which I sold. The new owner claims that it bested a $12k Bespoke TVC. A TVC is a step-down attenuator, is what I understand. So the signal from source is toned down before being sent to the power amp.
I was pretty happy with the TVC for years. But when I replaced this TVC with an active preamp, the system gained musicality and life. There is a certain fullness that makes listening more pleasurable. Bass is rock solid and startling at times. I am amazed by what a great active preamp can bring to your system. And I had avoided an active preamp for 9 years thinking that they would distort or add fuzziness to the original sound from the source. Well, lesson learned!