2. misc-audio
  3. 147971-70765

Perfect Path Tecnologies ‘The Gate’

Having been a music lover and audio enthusiast for more decades than I care to admit to I’ve had the privilege of owning some tremendous components over those years and thought I had attained a level of musical enjoyment that would be difficult to improve upon without spending more money than I could afford. Then along came The Gate to turn my audio conceptions on end. 

While I was quite skeptical of all of the positive proclamations regarding the Perfect Path mats, cards and contact enhancer ( how could they possibly bring about such sonic improvements?) I took the plunge and purchased a nano bundle to see what the hubbub was all about. Much to my surprise they not only brought about improvements to my systems’ ability to recreate a more musical sound but did so in spades. 

When Tim of Perfect Path Technologies asked if I wanted to try his new product, The Gate, I jumped at the chance thinking it would be a nice addition to what the other products provided. I wasn’t prepared for the quantum leap The Gate brought to my music listening pleasure. As much as the other products brought about a much lower noise floor, greater detail and delicacy, improved dynamics, richer tone and more realism The Gate does so in magnitudes difficult to describe. The best way I can describe its affect is unreal purity leading the most realistic musical sound I’ve had the pleasure of experiencing.....outside of a live performance obviously. It has me listening to all of my CD’s as if for the first time again.

I have no idea how The Gate actually works or what it does I just know it’s the most dramatic tweak to my system I’ve ever experienced and I wouldn’t think of being without it. As to how it’s implemented, it’s installed in the electrical panel with one lead connected to the common buss and the other to a breaker ( preferably 220). Hope I got the terminology correct.....I’m far from being an electrician!

At $4,999.00 it’s not cheap but worth every penny to me as I’ve spent more on components with less sonic improvement. 

Lastly, I realize some will scoff at something they can’t understand and I get not understanding it as I don’t, but I would hope people could keep their skepticism healthy and civil. I am not here to promote or sell, nor do I have any affiliation with PPT. I am only sharing something that I’ve found to be transforming in my system. Sorry for the lengthy introduction.
128x128mac48025
folkfreak's avatar
folkfreak
1,349 posts
 
@millercarbon I’m actually an EE by training so somewhat aware of how this stuff works.

Its actually not scaremongering (I’m sure that given how this is connected it’s not going to cause issues, but do worry that the "home made" appearance is more than a little off-putting) but a more practical question of having the basic information needed to reassure a skeptical electrician that what he/she is doing is kosher.

The very fact that PPT in their own advertisement state "Hookup is simple, but must be performed by a licensed electrician" implies that they are well aware of these issues and I (and others it seems) think it would seem reasonable to provide some basic information to convince the electrician installing this item for us what it is and whether it is safe and code compliant. Over the years with Balanced Power on wall installations, dedicated spurs in conduit and other power related changes have had many awkward conversations with the electricians doing the work and inspectors conducting subsequent sign offs.

Perhaps one of the owners would post a copy of the installation instructions and this can help us all out?
uberwaltz's avatar
uberwaltz
13,381 posts
 
Being an industrial electrician dealing with mostly lethal high voltage lines of 480v I might know a thing or two about being careful concerning electrickery.

I would likely agree that the largest hurdle here would be persuading a reputable outside electrician in a state that is very code conscious that it is "ok" to wire this into the main panel without a bit more than your say so that it is fine.

Best approach would be just do it yourself paying due diligence to your own health and safety.

As I obviously would do this in a heartbeat I am not at all concerned but can concede the point.

Would not be the first time I had been presented with a piece of equipment on site with zero paperwork or electrical prints and been asked to "just wire it in"

Uh uh, no way Jose!

However we are talking 480v and 1200a plus applications, something that will pick you up and throw the leftovers across the room if you screw up!
millercarbon's avatar
millercarbon
12,531 posts
 
Well then its even worse than I thought. Because a genuine EE ought to know enough to be throwing water on this with knowledge and not fanning the flames with innuendo.

Another teachable moment: saying you're an EE is not even remotely the same as demonstrating actual knowedge. Saying you're an EE only matters to people who think titles matter. Which sure ain't me. Which is why I asked for actual hands on experience, and a demonstration of electrical principles. Neither of which you've provided.

Oh and, still waiting on that apology.
jetter
3,050 posts
 
millercarbon…."For certain they know absolutely nothing about what is inside the Gate."...

We can expand on that, for certain we know absolutely nothing about what is inside any of the Perfect Path products (LOL).

Not to worry, this will all be put to bed when Tim comes on here.

millercarbon, you just became the last person anyone would apologize to. 
perfectpathtech's avatar
perfectpathtech
236 posts
 
@folkfreak I will be sure to pass the homemade thing along to aerospace company that graciously fabricated my parts for the Gate. 
More to discover