Is it possible to have vinyl nearly noise free?


I’ve been cleaning my vinyl starting with spin clean then using Orbitrac cleaning then do a vacuum with record dr. And finally putting on gruv glide..and I still hear some ticks and pops. Is it impossible to get it nearly completely quiet? Would like to ask all the analog audiophiles out there. Please share what is the best method and sequence to clean vinyl..thx everyone.
tubelvr1
The elephant in the room, of course, is even if you eliminate all of the surface noise or can play vinyl that’s noise free, there is still the sticky wicket of the Signal to Noise Ratio for analog systems being much lower than the SRN for digital systems. In theory, anyway. 
Post removed 
Whart,
I use the alcohol only about once a month and it is iso propyl not denatured. If denatured alcohol got back to the coils it could really screw things up. As a solvent iso propyl is just one click stronger than water. On a regular basis I just use a standard stylus brush which I use maybe once every third listening session. Because I use a grounded sweep arm and a dust cover my stylus does not collect much dust. What I really need to get is one of those USB microscopes. The monthly alcohol cleaning is based more on tradition then whether or not the stylus and cantilever are really dirty. It would be nice to be able to see it more clearly.
Mijostyn- those digital microscopes- at least the cheap ones- are a little tricky. The 'frame' of view with high magnification is very limited- obviously, and care must be taken to mount the microscope in a way that it is aimed properly and doesn't move or get jarred. I use a lab stand and lab type clamps- but I didn't go all spendy on a $400 US one-- they were under 50 dollars US. Maybe the expensive ones are better. You can definitely see a lot more. 
For routine cleaning, i use various loupes- i did a little research on them, most of them are pretty bad, optically, and the claims of 20x-60x are kind of a joke. From what I gather, a jeweler's loupe should only be 10x and have triplet lenses-- I have several. One I use-- i'm getting old-- is a set of magnifying eyeglasses with illumination. It's only 3x, but sufficient for me to see the stylus and brush- i've been using a longer bristle than the pad type, as I mentioned. 
I guess this is all obsessive but I think we agree that keeping that stylus clean as well as the records is pretty essential. One thing I found on my Airtight Supreme, which is now out for rebuild, is that a lot of stuff collected on the top of the cantilever. This, even though I'm pretty fanatical about record cleaning and stylus cleaning (the latter within reason). I also think there's a lot of stuff-- dust, human skin shed, whathaveyou-floating around in our rooms. I have a dedicated room, no pets allowed, no smoking, etc. and decent central air con and heat with good filters. There's still an endless amount of 'housecleaning' to do in that room, which just adds to the stuff that can collect on a record during handling and play. 
regards,