I used the Gold Lion KT77s in place of the EL34s, and thought they were great. I will say I never even thought to check, but I did not realize when using them that it would change the desired bias value.
Looking for an integrated tube amp under $2500
I’m in the market for either a used or new tube integrated amp to drive my Lawrence Audio Violin SE speakers which have an AMT tweeter. These speakers have a sensitivity of 88db and minimum impedance of 6.4 ohms. The amp should sound warm and smooth without any treble glare. The amp must be also reliable since my previous amp visited the repair shop 3 times in 4 years. I do prefer it come in black and must be 7" or less. I appreciate any recommendations.
- ...
- 52 posts total
I actually had a Rogue Cronus magnum with kt -120 tubes which I really liked but it didn’t control the bass, was to loose. Went to the Hegel h100 which I liked but didn’t have enough power so I bought a h300. I then bought a new pair of large Ushers and needed more power so I went with a new McIntosh preamp and ps audio bhk amp. |
Quicksilver Integrated Hand wired, point to point. Built like a tank and sounds awesome. http://quicksilveraudio.com/products/integrated-amplifier/ |
The OP did not provide information regarding the size of the room in which the amp and speakers will be installed, or about listening habits and preferences. From a need for a solution that is no more than 7 inches high, can we deduce that space is limited ? This may be important due to sensitivity of the speakers. 88db in a large room with a modest tube amp may not be enough power, but in a small(er) room may be sufficient. Many good suggestions were made. My suggestion is a bit out of the box: Go vintage. There are several models of vintage integrated amps, that once correctly restored, will rival the sound of new amps, at a comparable (or lower) price. Vintage amps tend to hold value much better than new. Sherwood 5ooo series amps are extremely well regarded, and sound wonderful. Sherwood embraced a slimline design, and all power tubes are installed at a nearly horizontal angle, minimizing the height of the unit. Fisher X202 is an outstanding amplifier, but will take up more space than a Sherwood. Fisher X1000 is one of the best integrated amps from the golden age. 40wpc of EL34 power and an excellent preamp section. Sansui AU series, and Luxman SQ series should be considered. One can find examples of all of the above for less than $1000 and then budget another $500-$1000 for careful restoration. In all cases I would recommend inclusion of a quiet fan behind the amp due to possible ventilation compromises inherent in tight rack spaces. |
- 52 posts total