Mulv: "Doesn't your Mani have a 48 dB setting?" I do believe you are correct, I may have missed that setting and gone straight from 42 dB up to the highest gain 59dB. The dip switch gain settings on the Mani are a bit of a pain in the ass to deal with. (but god bless it, it's a good phono). I will play with that tonight when I get home.
Lewm: to answer the questions: Nagaoka 4.5mV output MP-150. Mani only has a turntable RCA input and a single output. Amp is a behringer Pro EP 2500, 450 watts/channel into 8 ohms. I have the gain all the way up on these all the time. Here are some of the Behringer specs:
Voltage gain: 34Db
Input sensitivity: V RMS (@8W) 1.23V (+4.0 dbu)
Input impedence: 10kohm unbalanced / 20Kohm balanced (I'm using unbalanced
Didn't seem like there could be anything wrong with driving it at max gain from the phono stage, just not totally sure. That's why I wanted some tips/cautions/gold nuggets if possible from you fine folks. I love this site!
Lewm: to answer the questions: Nagaoka 4.5mV output MP-150. Mani only has a turntable RCA input and a single output. Amp is a behringer Pro EP 2500, 450 watts/channel into 8 ohms. I have the gain all the way up on these all the time. Here are some of the Behringer specs:
Voltage gain: 34Db
Input sensitivity: V RMS (@8W) 1.23V (+4.0 dbu)
Input impedence: 10kohm unbalanced / 20Kohm balanced (I'm using unbalanced
Didn't seem like there could be anything wrong with driving it at max gain from the phono stage, just not totally sure. That's why I wanted some tips/cautions/gold nuggets if possible from you fine folks. I love this site!