2. digital
  3. 148561-106445

Sorry to ask this SACD question, but

What equipment do I need to play the Stereo layer on a  SACD at 176.4khz .  I have searched the forum for more than an hour and I'm stumped.  Lets say I have a https://www.crutchfield.com/p_022CD1000B/Yamaha-CD-S1000.html?search=sacd

Or a  https://www.crutchfield.com/p_033DCD1600/Denon-DCD-1600NE.html?search=sacd 


and I want to use a  Schitt Bifrost Multibit DAC,  https://www.schiit.com/products/bifrost instead of the internal DAC.  What else do I need?


What else do I need to play  SACD at 176.4khz 


Please don't flame me, I really am stumped.


JD



 
128x128curiousjim
uberwaltz's avatar
uberwaltz
13,381 posts
 
Jim
You might want to check the OPPO menu for output of SACD.
You have 2 choices, dsd or pcm.
You should set to pcm for analog output I believe.
uberwaltz's avatar
uberwaltz
13,381 posts
 
How do I hookup my 2-channel (stereo) audio system (to play SACD and DVD-A) to the player since it does not have stereo outs?
You have to use the FR and FL channels from the 7.1 analog outputs to get the stereo output (set the BDP-93 to do a stereo down-mix for > 2 channel sources). Also, just in case you are not aware, the BDP-95 will be released in the near future as a replacement of the BDP-83SEwhich will have much better DACs for analog outs. You may want to wait for it if you have a high end stereo setup.
This from an OPPO forum might help.
mahler123
3,413 posts
 
I output DSD from my Oppo 105 over HDMI into the HDMI input of my Bryston DAC3
uberwaltz's avatar
uberwaltz
13,381 posts
 
That works Mahler but Jim wants to output over rca analog
I think he just needs change some menu settings and he should be all set
curiousjim's avatar
curiousjim OP
4,921 posts
 
mahler123,

The Bryston DAC-3 looks like just what the Doctor ordered. It is on my list in all caps!

Thanks again for the tip.

JD
More to discover