Best tonearm for London Reference Cartridge


Hi,
i have a Decca London Reference Cartridge (LRC), actually mounted in an older Mission Mechanic tonearm and would like to ask you with which tonearm one can get the most out of this wonderful cartridge.
The player is a Kuzma Stabi Reference and a Thorens TD 124, other arms i use are Sumiko MDC 800, Shindo Meursault and old Decca for ffss cartridges, but in these i haven´t tried it yet, but all these tonearm run with other cartridges so fantastic, that i don´t want to change them.
Some people recommend the long VPI 12.5, 12.6 or 12.7 tonearms. Have you some other suggestions?
Thanks very much!
breezer
A bit late..... I have no experience with the London Reference but I've installed my J. Wright upgraded Decca Gold on my  Schick 12" using a Saec ULS3X ceramic headshell. My Decca Blue is giving me its best performances on a SME series III with high viscosity oil damping and an ebony weight on the headshell.  Turntable is a BL-91 Micro Seiki. I was told that Karmadon's own design viscous damped unipivot also gives excellent results. 

I posted in 2014 that I was using a 12" Jelco 750L. I've since upgraded to a 12" Jelco 850L and the improvement is not insubstantial. Highly recommended (entry-level on price) high end tonearm. 
I've been using the Jubilee with a Well-tempered Amadeus turntable and arm.  It is a match made in heaven.  You have to fill the damping cup with goop, but when you do it seems to track faultlessly.  I also had some hum problems but a better set of connecting cables pretty much got rid of them.
I second Rolanda’s post and recommendation of the pairing with a Well Tempered Amadeus turntable/tonearm. I’ve used my WTA with a London Decca Super Gold for several years. As I’ve stated on other occasions “a match made in heaven.” 
I run my London Reference in an FR66s mounted on a Brinkmann Balance.
As presumably with any cartridge it benefitted from using good quality silver tonearm wires (in this case mounted in Arche headshell).
According to John Wright (who makes and services the cartridges) the FR arm is ideal and he uses an FR64.
He recommends a VTF of 1.8 gm (+/- 0.2) with VTA set so that top plate of the cartridge is parallel with the record, although he said there is no absolute and the ear is the best guide. In this regard I found that having the tail of the cartridge a nano-smidgeon lower than the front gave best results.After experimenting I found all works best with no bias setting at all.
As per above (VTF 1.82gm) there are no mistracking issues and it rides warped records as well as anything else I’ve got.
i have various other “high end” mc cartidges and the Decca is by far my favourite. You need to keep records clean and it doesn’t like bad scratches.