Tonearm for Technics 1200GR

The stock Technics arm is just fine! Leave it alone!

Ive been reading from various sites that the arm is one of the weaker links of the 1200gr.

here is one such site:

https://ammonite-audio.co.uk/is-it-worth-upgrading-the-new-technics-sl-1200gr-turntable/

They also make armboards for SME and Jelco arms, and even blank plates.

Are you serious when you say the stock arm is just as good as these “upgraded” arms?

thats fine by me since I want to upgrade to a Soundsmith Zephyr. I just thought upgrading the arm wouuld benefits all future carts and isn’t a wearable item.

Jeez.That’s amazing. A website that is run by a commercial entity that makes arm boards for the SL 1200 G series and sells SME and Jelco tonearms, advises that either of these arms is a good upgrade replacement for the stock tonearm. Isn’t it possible that they have some bias?

 In my opinion, to upgrade the tonearm in a significant way, you would have to go to something like the Triplanar. Apparently several SL 1200 G users who post on this forum have done that. But I think it is at best a sideways move to change your tone arm for a Jelco 750. There are even better Jelco’s that you could use. As always, this is only my opinion. But I have examined the stock tonearm very closely, and it seems to be extremely well-designed  and executed. I do not own an SL 1200 of any kind.

Actually, Reed would be nice, this is the most versatile tonearm for the most critical setup, but it's expensive.

The benefit of the Reed is that you don't need a hole in the armboard, except for the 3 short mouting screws from the top. 

  https://www.reed.lt/tonearm/

Dear @last_lemming  : I don'tknow what you don't like on the Technics tonearm. Why are you non satisfied?

That Technics tonearm comes with extremely good bearings that's not the the " soul " of any tonearm but its heart/core.

The bearing friction of the Technics is lower than 5mg where no one of the tonearms named here has.

Now, you can improve your listening experiences with that tonearm changing its headshell wires and even testing your cartridges with other headshells that can comes with different build materials, different weigths or different shapes.

Headshell is the first " contact " between the tonearm and the cartridge other than the LP surface grooves. It makes a difference in the quality performance levels with any cartridge.

Before I spend my money in a new arm I will try those headshells and headshell wires.

Other up grade for the Technics is to change its internal wires.

Maybe you already did it but room treatment makes a difference too that can help to improve your listening MUSIC experiences.

Anyway, that's me but the " ball " is at your side.


Regards and enjoy the MUSIC NOT DISTORTIONS,
R.