I would highly recommend auditioning the Diesis Ludos, available at Rhapsody audio. Beautiful top to bottom natural dynamic sound for 29k. Gutenberg auditioned the 100k version and fell in love but Bob at Rhapsody told me this was just as good from his listening, I certainly loved it but out of my price range. There is also a slightly larger Aura for 35k. See details on Ludos below. Best of luck in your search
The transducers used for the low frequencies are two high-efficiency ten-inch woofers, assuring comparable performance to larger models as it reduces a few db of sensitivity because the slimmer design. Upper registers are entrusted to a 45mm compression driver, which is the same as in the Aura one-inch throat. The circular design of the horn, which allows for far more efficient sound diffusion in tight spaces, was designed specifically for this model out of a solid block of milled ARNITE which was then lacquered. The Ludos can be considered a two-and-a-half-way speaker with two identical woofers but tuned to different frequencies. As in other Diesis models, in the Ludos the crossover filter, the assembly of the components and the finishing are all made by hand with no compromises. The efficiency along with its optimization for cozier spaces causes a nearly-live experience even with low-output tube amplifiers.
2.5 way system with 3 speakers
Two dipole loaded woofers 10 inch
Understanding driver from 45 mm exponential horn loaded on specific Sharp Audio
Sensitivity 93 db 2.83 V/M
Nominal impedance 6 Ohms
Frequency response in environment from 37 a 26.000 hz a +/- 8 db
Minimum power 10 watts RMS
Max power 130 watts RMS
Acoustic crossovers to 180 Hz and 2000 Hz
Maximum dimensions width cm Height cm depth cm 32,8, 28,9, 104,2, single speaker Weight 40 kg
* Bearing frame Clad 58 produced on specific Sharp Audio (material composed of mineral powders, cement and special resins) cast in one mould
Trumpet by one inch fiberglass and abs made about specific
Totalfix proprietary system for fixing the woofer
Cross-over hard wired with high-quality components treated with dielectric resins to military standards
Removable front panel and trumpet to allow editing of the aesthetics of the speaker in order to customize its inclusion in environment