Need RCA loading plugs

Now don't you feel silly even asking that question? Herron Audio uses this type of loading , you might drop them a request.

Right. Herron sends an assortment of RCA loading connectors along with every phono stage. Keith did listening tests and likes the sound of the particular connectors and resistors he uses. Other than that however they are perfectly ordinary RCA connectors. Open one up, you got two pins with a resistor soldered in between them. That's it.

Its a loading resistor. What else could there possibly be?

???

Beuller? 

Sorry if some are triggered. There's a saying, "This is gonna be a stupid question." Which sometimes is in fact followed by a stupid question.

Triggered? Go sit somewhere quiet and dark and hug your blanky till the bad feelings go away. Or, better yet, grow a pair and grow up.

PS: I should add we will not charge you for this and we will include return shipping if within the USA. 

@imhififan made a great suggestion with that uber cheap rca with screw terminals....if only to experiment with!
Buy that and the resistors. (Or if you want to dive deeper into the rabbit hole several different types/brands of resistors.

Experiment away and make a short list of what you want.

Get those made up on a better plug.

Have you tried it without loading? I have a JLTi which I run without loading plugs. It runs a Zyx 4D LOMC very nicely at 47K .It also ran a Benz Ebony L without loading. If your preamp is stable enough it may run without the loading. But you won't know til you try it.

Steve, Does your Einstein provide two pairs of phono inputs that are in parallel with each other, electrically?  That's the only case for which the simple solution offered here would work, simply.  Otherwise, you would have to piggy back one RCA plug loaded with the desired resistor into another that receives the signal from your phono cartridge, or use some sort of Y-adapter.  Still doable but maybe not so simple.  In addition, there is the possible signal degradation associated with using so many connectors in the signal path, a bugaboo of those afflicted with audiophilia nervosa.  I would solder the load resistor directly into the circuit, inside the box.  And maybe that does take some chutzpah.