SoundSmith Counter Intuitive for VPI tone arms

The original (thumb screw) counterweight on the VPI 3D arm is not a user friendly design. The Counter Intuitive really makes life easier here. 

From just looking at the newer Fat Boy arms, I see the counterweight has been improved upon. Looks like it's more a pressure fit design on a smooth arm surface. Much nicer!

Yes the CI works very well.  No friction problem here.  Perhaps there was a user who didn't like the normally tight fit.

Even useful, though perhaps not as essential, f you get the dual pivot which I also recommend.

I have a Prime, with the dual pivot and the counterintuitive. Like the person mentioned above, the counterintuitive weight fits very tightly on my standard VPI counterweight (180g? - I’m not near the table right now). I took great pains to make sure that the scale was applied as flatly and evenly as I could, but sliding the weight fore-aft or rotating it is very difficult. I’m not talking snug - I’m talking so hard that it’s difficult to keep the counterweight from moving. Suggestions greatly appreciated!

"I’m not talking snug - I’m talking so hard that it’s difficult to keep the counterweight from moving."

Larryrs- maybe some careful,lite work with fine sandpaper will loosen up the fit of the CI.

Yes. That was referenced earlier and that may ultimately be what I do. Some sort of lubrication was also mentioned but the notion of a lubricant on an exposed surface near the stylus and record doesn’t seem optimal.