2. analog
  3. 139152-5961

Can you run the HANA SL MC at 100 ohms?

I am tempted by the Hana low output MC  cartridge which has gotten great reviews and seems good value. However the mfr specs say the loading should be > 400 ohms. My own phono stage only allows 100 ohms for MC cartridges-as do many others. Has anyone tried the Hana at 100 ohms and were you happy with the result?  Also what difference should I expect to hear at 100 versus 400?
rrm
fedie
61 posts
 
Lewm is correct in his post, sorry for any confusion.
big_greg
6,726 posts
 
I moved the turntable (Clearaudio Emotion) I have my Hana SL mounted on to a secondary system and am using a Parks Puffin which only has a 200 ohms setting and it sounds great there.  No experience at 100 ohms.
atmasphere's avatar
atmasphere
12,176 posts
 
^^ Good. The highest load you can run without problems is the best load.
audio_d
56 posts
 
tried the hana sl into a couple of phonos with 100ohm loading - cambridge audio 651p, plinius m14.it sounded ok.sounded much better into 47k
chili5555
15 posts
 
I find the reasoning behind the loading kits like DB Systems, at the least, questionable. If my phono pre or SUT has a fixed input loading of 100 ohms and I add a 300 ohm resistor in parallel, what is the resulting load impedance? Hint: it sure ain't 400 ohms as is widely believed.

https://www.swtc.edu/Ag_Power/electrical/lecture/parallel_circuits.htm

FWIW, I run my Hana SL into a SUT with a fixed input load of 100 ohms and it sounds excellent.
More to discover