Who Has Technics Headshell with Azimuth Adjustment?

From the Panasonic site photos it appears there is a set screw at the bottom of the barrel.  It may be that headshell removal is necessary to access that screw, which would be a pain.  Those manufacturers that provide a set screw on the side of the barrel at least allow adjustment without removing the headshell.

Whoever try to fasten carts without screw threads with screws and
nuts know how irritating this way of fastening is. For such carts the
AT headshells are much more easy to use.  Because screw threads
are at the under side no nuts are needed . Holding those small nuts
fast while trying to get the screw in is an nightmare. But because
there are only 3 such threads the effective length can be only adjusted  with movable 4 pin connector . To put this otherwise AT
headshells are not ''universal''. They are suitable for the carts without
screw threads. 

Nandric, you are missing the point of this thread: azimuth adjustment on a Technics headshell. 

Thanks imhififan for the links. I will call my local dealers to see if they can order a couple of these headshells for me. 

To to answer the question that many might be thinking, “why would you not just go aftermarket?”, it is because I want to keep my turntable build (vintage SL-1700mk2 original spring suspension, SL-1200mk2 feet, Audio-Technics VM540ML cartridge, balanced tonearm interconnect with XLR to my phono stage, KAB fluid damper, SL-1200mk2 dustcover, and soon - powder coat finish with original silver colour on the plinth) based on Panasonic parts as much as possible. It might turn out that Panasonic parts for everything don’t give me the results I’m looking for, but this is the path I want to pursue. 

Dear @sleepwalker65 : I understand that as possible as you can you want Panasonic/Technics.

All the Technics headshells are around the " mediocrity ", nothing better than that and I'm talking that are not the best match for cartridges and its headshell wires are too on that mediocrity levels.
The only Technics headshell I can recomend ( even that has no azymuth mechanism. ) is the original that came with the EPA 100MK2 tonearm.

If other than stay with " Panasonic " could " move " you as can be the quality level of what you are listening then try to look for other headshells that comes with the Azymuth adjustment that's really critical for quality level performance and if you follow with Panasonic at least change the headshell wires for a better quality ones: this is important/critical too for quality in your listening experiences.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.