2. home-theater
  3. 150588-2164

Separate subs for music and HT/surround

My stereo setup is comprised of Ayre 5/20 series digital hub, preamp and amp that drive KEF Ref 1s through a passive Marchand high-pass filter. For HT and surround, LR side and rear surround from an SP3 go to NAD Class D amps that drive LS50s. The SP3 receives HDMI from an Ayre DX-5 DSD, and its front LR output goes to a balanced by-pass input of the KX-5/20. I have two Velodyne SMS-1 bass managers that provide acoustic room correction, two HGS-10 subs, and two HGS-15 subs.

Question: Should I use one SMS-1 with the two HGS-10s for stereo and the other SMS-1 with the two HGS-15s for HT and surround music? I realize there are advocates for using 4 subs, and I could daisy-chain the SMS-1s, but separating the SMS-1s seems a neat way to keep stereo separate from HT.

db
Ag insider logo xs@2xdbphd
kgveteran
377 posts
 
I just recently realized for music (in stereo) i have to dial back my subs to -12db, for movies i go back to -4.5b where Audyssey put it. I leave Audyssey engaged and DynamicEq on also, for my low level music its works
the two surround modes (Denon X4300), dts and Dolby both stink for surround music, I miss Prologic II.......
my subs are on either side walls 1/3rd into the room from the front screen wall, my LP is 1/4 into the room from the back wall, no EQ needed, it was all about the level. 
I have a rolling 600lb door that seals off the room for late nite watching, but I prefer the door open for music.........
clearthink
1,421 posts
 

kgveteran"I just recently realized for music (in stereo) i have to dial back my subs to -12db"

It sounds like you're Music Reproduction System is improperly aligned, tuned, or installed for this to be the universal result with you're setup.
jay23
210 posts
 
http://jtrspeakers.com/captivator-4000ulf.html
Buy one of these and crossover at 40. 😎
kgveteran
377 posts
 
@Clearthink i could probably place the level inbetween...... gonna give that a try, hmmmm -8db and call it quits
Ag insider logo xs@2x
dbphd OP
1,630 posts
 
The Velodyne HGS-15s are now behind the KEF Ref 1s, an HGS-10 aside each Ref 1.  The HGS-10s are connected to one of the SMS-1s, the HGS-15s to the other.  With the SMS-1s daisy-chained I can turn one off if I want only the HGS 10s or HGS-15s.  I've been listening with just the HGS-10s active and I like it for music.  Makes me wonder about replacing the HGS-15s with another pair of HGS-10s.

The Sanus rack makes equipment very accessible and is a joy to use.  Should have done that years ago.

db   
More to discover