VPI's new "Vanquish" Ultra High-End turntable is a STUNNER!

edgewear, you never get your monies worth when you spend 2-3 times as much for an inferior product. However the person who buys one of these would not know the difference. In reality they will sell very few of them because the vast majority of real audiophiles are not that dumb.
I just discovered if I place a neodymium magnet 1.004 meters from the spindle on a line through the horizontal bearing of the tonearm the image just snaps into focus:)

I guess it depends on your definition of 'money's worth'. If a person wants a trophy to show off and likes the VPI's idea of good taste, he'll probably have his pride of ownership. That's what this is all about anyway. It's got nothing to do with sound quality per se.

Oh, thanks for the correction lewm, right gimbal. Got it.
Not envy at all lewm. A practical analysis of the product at hand. The only positive thing I have to say about it is that at least it has a gimbal bearing on the tonearm. I would get a Kuzma 4 point 14 long before I would buy that (actually not a fair comparison because I have a 4 point 14). How about a 12 inch Tri Planar or a Reed 5t or a 12 inch Origin Live Enterprise or an SME V 12. There are so many arms that at just a glance I would go for over that. A SAT arm on a SOTA Cosmos would out perform that and save $60K. As I have said before I could care less what a piece of equipment looks like as long as it is built well and my own choice in turntables reflects that. The only turntable on the market I have the hankering for is the Techdas AF 1 because it is a clever, extraordinarily well built extremely cool, state of the art mechanical device. Will it sound better than my SME 30/12? Probably not, at least noticeable by me. But I am jealous of those that have one. At this moment I have other fish to fry.
What I REALLY want is a Mclaren 720S Spider.

@mijostyn, TechDas is the first company I think of as a design trying to push the enveloppe. With the current renaissance of vinyl playback they gave Hideaki Nichikawa - the designer of top Micro tables like the SX-8000 mk2 - the opportunity to build on his 1980's designs, using modern cutting edge technology and large resources to do it. The AF series is a 21st century incarnation of the Micro tables. The AF I and II are descendants of SX-8000 mk2 and the SX-5000 mk2, while the AF III strongly resembles the RX-1500VG.

But as mentioned before, we're now in the age of hyper capitalism. So TechDas added the AF Zero to their line up. They pulled out all the stops, making the ultimate statement at $400k. They can bring this thing to market, because that market exists in the real world. A pretty sick world if you ask me, but there you are.

As was mentioned previously, pushing the envelope is what makes the stuff we can afford better. That there are people out there that can afford it makes advancing the art practical. In reality, if you put the same tone arm and cartridge on a lesser table of high caliber you would probably not be able to tell the difference. IMHO the AF one is elegant the Zero is not. I think it is more complicated than it needs to be. Mr Nichikawa is over reaching. But the press bought it as usual. Michael Fremer in his usual manner spewed praise in the silliest of ways. "This turntable stomped all over every other turntable I have ever heard. It wasn't even close -beginning with blacker backgrounds than I have ever heard from a turntable."  The back ground noise on the absolute best pressing is far in excess of even the cheapest modern turntable. It would be like trying to hear a pocket radio standing next to a running bulldozer. The only reasons it is better than his current table are it is much cooler and it cost twice as much. Only 40 of them will be made and 10 are already sold so edgewear you better hurry up and get in line:) Rich people buy stuff that gives the rest of us jobs and in the end better stuff. The time people wast being jealous is the time they could spend making themselves rich and in more ways than financially.