Subwoofer rumble issue

It is  s Must ,saying what brand,and model it is cheaper ones 
Has minimal control small amplifiers, magnets and pole pieces
As well as cabinet construction all important factors 
How to you adjust it ?  The SVS 3000 line SB with app
For just UNDER$1K 13 inch aluminium driver  beat my  $1500 JL Audio in every respect
The split coil poll piece  works for great bass even at low volume
And the app works great . #1 sub and buy of the year. 

He already told us what brand and model the subwoofer is, a REL T9i.

Buy the svs sb 3000 with control app for under $1k delivered

Buying a bigger and more powerful sub is not going to fix a turntable problem.

for better of for worse I use EQ on my power amp (crown xti) to make a high pass filter that slopes steep below 30Hz, this removes any subsonics from record warps. If I place the needle down on the record you see the cone bounce without the filter, you see almost no movement with the filter engaged, I find it very reassuring especially as it should prevent any feedback. It may be a band aid to an underlying issue but It does work.

@paulgardner:
I had the rumble problem for quite a while. I built a suspended TT platform that is isolated from the floor and walls, using dampened springs. I also recently purchased a DBX Venue Driverack 360. I haven’t had a problem since. It incorporates a graphic, as well as a parametric EQ, with “Q” adjustments that come in very handy. The “360” has many other features that I enjoy. You can control the unit with a smartphone or laptop.  ALL speaker’s phase can be adjusted from your chair, as well as ALL speaker’s timing. Of course each speaker has it’s own level control and shelf roll offs. I can even use it’s subharmonic synthesizer for deep bass, although sparingly. If you’re not familiar with this unit, it would be wise to check it out.
(I’m using two JL Fathom 113’s as subs, with my TT platform on the left side wall). Placing your TT in between or in back of your speakers will exasperate the problem even more.