2. home-theater
  3. 153431-133784

Combination of 1st order and 2nd order crossover in 3 way box

I'm re-doing some old Sansui 3 way boxes.  Is it crazy to use a 2nd order crossover between the mids and highs but a 1st order between mids and lows.  I want to crossover at 375Hz and 3K Hz.  With the response of the mid and high drivers I think they would be better served with a steeper slope at the 3k mark.  Does anybody have a crossover designer to help me with this or am I going to cause more phasing problems that will negate the benefits?
dannybad
erik_squires
16,021 posts
 
Danny,


If you don't know the driver response, and acoustic offsets you can't possibly be talking about crossover typologies yet.


You really are a lot further than you think.  May I strongly suggest, try your hand with the simulated speaker I posted. See if you can make it work. If you start a thread on DIYaudio let me know and I'll jump in and discuss.


The simulated speaker is free, and you will learn a great deal quickly.


Best,

Erik
bdp24's avatar
bdp24
9,747 posts
 
Talk to Danny Richie at GR Research, a master of x/o design.
dannybad OP
20 posts
 
Erik,
    I have all of the driver specs but I haven't tested them in the box.  I was more asking the question about combining different order crossovers so that I can learn more about them and to learn people's thoughts on them.  I have since found a lot of info on it.  With just the driver spec's in mind I think it would be beneficial to protect the tweeter with a second order order high pass slope and the mid range driver would do well with a second order low pass slope given it's problems around 8k.  I plan on getting a good reading from them once they are in the box and going from there.  I will take a look at your simulated speaker.  I'm just in this for the fun of it.  Thanks
More to discover