Subwoofer matching


I was all set to pull the trigger on a pair of REL subwoofers.  These would be used with my Avangard Duo’s and Pass Labs XA 60.8 monoblocks.  My main music is Rock, Jazz and Blues.  I have been given advice by a few people now saying the 107 efficiency of the Duo’s will make it very difficult to find a matching paint odd subwoofers.  Feed back I have been given is “... it will take a powerful subwoofer to be able to match the output levels of your speakers“ and “The only REL model that may work for this application will be the 212/SE, which has a very powerful amplifier that will allow it to blend well with your speakers.”  A pair of REL 212/SE is a budget breaker for me.  I am in not position to judge if the advice is correct or not.  Does anyone have experience negating a pair of subwoofers to a highly efficient speaker?
chilli42
I have 99db efficient horn speakers and use 2 RELs (bought used in mint shape for around 200 bucks each...a 10" and an 8") with 'em, and have never sensed a lack of "speed." They have input level controls along with phase and frequency adjustment...works swimmingly.
The quoted words of caution are from REL customer service.  My I am suspicious but they recommended two of the biggest most expensive subwoofers they sell.  The REL recommendation was seconded by a couple of friends.  I am also considering SVS subwoofer.  They did not seem to think that their subwoofer would have a problem keeping up with the AG Duo’s.

The reason I am not keen to buy AG subs is that I don’t want to have flexibility issues later if I migrate to a different main speakers.
Have you considered trying a pair of the HSU subs, they are reasonably priced and sound good with horn speakers.
I will look into HSU.

Acresverde, the goal is to complement the current speakers.  Not considering replacing the bass drivers that coming with the AG duo’s
Kalali, the idea that a smaller subwoofer is faster is incorrect. Given appropriately designed motors a 15" sub is just as fast as a 10" sub. The 15" driver does not have to move as far to produce the same output so typically larger drivers have lower distortion not more. When a driver can not react to the signal in time what happens is the driver's response falls off or they start "breaking up."  Most large drivers can go way higher than they are required to do. My 12" drivers will make it up to 700 hz before breakup and I only run them up to 125 Hz. Now you can get away using smaller drivers by using them in multiples. This only makes sense when you have to get the speakers within a certain form factor. Can't put a 12" driver in a tower speaker 10" wide. Otherwise, when it comes to low bass large drivers rule. For most residential sized rooms say 16 X 25 four 12" drivers will do the job by which I mean 105 to 110 db comfortably.