Hey, how big is your room?? And what are you using for electornics? Budget?
Do I need a sub?
Would I benefit from even a small sub?
Energy rc-70s’
dual 6” woofs, bass is there, but would a sub remove the lowest freq, and give the small drivers a break, and sound better?
would it help,? I play loud once in a while, would the low freq removed from the main tower drivers make a better sound, I don’t think I would need much more than a 10 or 12” sub.
Powered or unpowered?
thoughts?
thanks
Energy rc-70s’
dual 6” woofs, bass is there, but would a sub remove the lowest freq, and give the small drivers a break, and sound better?
would it help,? I play loud once in a while, would the low freq removed from the main tower drivers make a better sound, I don’t think I would need much more than a 10 or 12” sub.
Powered or unpowered?
thoughts?
thanks
- ...
- 35 posts total
We've beaten this subject to death. Short answer: You can have one, but you don't absolutely have to have one. Take a look at this thread: https://forum.audiogon.com/discussions/there-s-a-lot-more-bass-in-a-6-5-driver-than-most-of-you-thin... If you feel you are missing slam, maybe look into improving the speaker placement or adding room acoustics. They may give you more for your dollar without adding a new speaker which may be hard to fit acoustically. Best, E |
The answer to “Do I need a sub?” is always yes. Even if you already have one, or two, or three, or more 😀 Multiple subwoofers is the path to high end bass and high end audio in general. Yes, if you high pass your mains they will play louder and clearer because it limits cone excursion on the lowest notes and hands that duty to the subwoofer which is designed specifically for that task. That’s what I do in my system and it sounds great. I’ve got two subs and my end goal is at least four. Not for loudness (although that’s fun sometimes) but for bass even-ness, extension and clarity. When you get a sub, invest in a MiniDSP module or something with DSP capabilities. It lets you precisely control the crossover and crossover slope, apply notch filters to help minimize room resonances, and do other things like apply Linkwitz transforms which can extend the bass lower as long as you have the amplifier watts and available cone excursion (for sealed subwoofers anyway, not sure if that works with ported). DSP and subwoofers should be married to each other in high end audio. Best of luck to you. |
- 35 posts total