2. analog
  3. 150758-92835

Trans-Fi Terminator Tonearm: 2019 Update

In reading a few related posts on linear tracking tonearm, in general,  and Trans-Fi Terminator , in particular, I thought I would give a brief update of the Terminator.

I purchased the arm directly from Andrey in Moscow two months ago. From what I understand, Andrey has taken over production after Vic's retirement. What I received is the most up-to-date version of the arm with the carbon fibre wand and brass counterweights, the direct wire leads from cartridge to  phono amp, and a new brass manifold ( not evident from the main web-site). Both the wand and the new manifold are Andrey's contribution to the continued refinement of the Terminator.

Also,  please visit this site: https://darklanternforowen.wordpress.com/2017/04/15/terminator-tonearm-new-arm-mount/. This gentlemen from NZ has developed a new arm mount for the Terminator which advanced the arm's sonics even further. It was reading through the the development of this new arm mount that convinced me to order the Terminator after much prior research. I did not purchase the arm mount from NZ as it would not readily fit my Verdier La Platine, instead Andrey made a custom arm mount. It is in essence a two point support mount rather than a single point support rod that is commonly used. 

My previous arm was a SME V of 1990's vintage mounted with a ZYX airy. The Terminator is several notch above the SME V. All the accolades given to the Terminator seem justified. My main point in writing is that the new developments by Andrey, i.e. the carbon fibre wand and the newest brass manifold, seem to improve upon the Terminator even more ( see link above ). This is the news that I wanted to share with existing Terminator owners. I asked Andrey to start a blog on all the new stuff that is happening with the arm, but it seems that he is busy making 'things'!




ledoux1238
ledoux1238 OP
290 posts
 
 @spiritofmusic Thanks for the Transfiguration recommendation. I’m looking into it.

What kind of sonic benefits are gained through a more controlled air supply ?  Could you describe a bit more? I had thought that the Terminator being a low flow system, any garden variety pump and a 1 liter serge tank would do. What it is quite obvious that there are quite a few users with rather elaborate air supplies. 

Btw, Marc, we’ve crossed path on Owen’s forum. This is Albert. :)
spiritofmusic
828 posts
 
Hi Albert!
I don't know the benefits...that's the temptation Lol
My guess is any turbulence or irregular flow will create some ripples that will lessen performance of Terminator
A totally smooth, (near) silent flow should only be an advantage.
And at the level of performance I'm getting, these last %age points can make the biggest differences.

The proof is in Andrey's 2019 Terminator design. The smaller better engineered air holes make a massive difference. So should a smoother quieter ripple-free pump.
ledoux1238 OP
290 posts
 
Hi Marc, I ‘m sure you’re right on optimizing the air flow.  

This is a bit of a history lesson for me. Do you recall how you came to the Terminator? Did you audition at Vic’s before you acquired it? Being in the same town, I would imagine that it must have been a word of mouth thing. Just curious how it started.
spiritofmusic
828 posts
 
Albert, not quite in the same town. I was in London, him 100 miles away.
As I moved away from the main dealer/big magazines input on gear choice to more online searches, I first found my Zus, and then the whole world of idlers. LT arms were, and still are, a real niche product.
Having heard a few modded 301s, 401s, L70s, mainly w 12" pivoted arms, on a variety of plinths, I more and more considered this my future (back to the future, circa 1964 lol).
In 2011, I ended up buying a slate plinth 401 w Terminator arm from Vic, but for a variety of reasons, it didn't work for me, and returned it. However, I'd been vaccinated now w the whole concept, and Vic was bringing out his rim drive Salvation.
Well, I loved the concept, the likely synergy of tt/arm design, and kept contact w Vic.
Demo in 2013 was slam dunk, and Vic installed it, getting by my original 401 poor setup killer.
And here I am today, 7 yrs later with the tt heavily modded (LPS to motor/Stacore isolation), and Andrey's 2019 Terminator/Owen's aluminium arm mount/transformer to pump.
Albert, the arm has snuck up on me. I kind of bought into the concept before I knew what it could really bring to the (turn)table (Lol).
From a vague impression of improved speed, stability, bass, over my SME V, and zero null point tracking issues, 7 years of 1000 lp plays/yr, getting setup right, and now the move to Andrey's 2019 Terminator/Owen's aluminium arm mount, I can absolutely see this arm as a landmark product in analog, audio history full stop. It is THAT impressive.

So, awareness of idlers online, and random catching of this Ebay ad from Vic...that's how close I was to never going down this path.
noromance's avatar
noromance
9,952 posts
 
Spirit, as I have a slate plinth 401, and yours didn't work out, should I remove the TFT from my shortlist of possible future tonearms? Thanks.
More to discover