DENAFRIPS DAC ---- Owner Impressions, Feedback, General Discussion, Questions and more....


Thread for OWNER IMPRESSIONS, FEEDBACK, QUESTIONS, ETC. regarding DENAFRIPS DACs.

DENAFRIPS lists the following R2R DACs:

Ares, Pontus, Venus, and Terminator (in increasing price order).

"DENAFRIPS incorporated in year 2012, focus in developing high end audio equipment at a very affordable price. Throughout the years of intense Research & Development, and continuous improvement of the product lines, DENAFRIPS had finally settled with the current product range equipped with R-2R ladder DAC technology. The reason behind this is the designer strongly believe that R-2R DAC is the best way to reproduce music.

The name, DENAFRIPS, stand for:

D-ynamic
E-xquisite
N-atural
A-ttractive
F-idelity
R-efined
I-ntoxicating
P-ure
S-ophisticated

This mean a lot and it is the house-sound of all DENAFRIPS products." [Copied From Denafrips About Us section]
david_ten
I see the new Denafrips digital-to-digital products accept clock inputs around 45mhz. Any idea why they chose these rates? The most commonly used rate in audio studio master clocks is 10mhz, as well as multiples of 44.1 to 192khz. Also, can the multiple outputs on these products be used simultaneously? In my system it would be useful to operate USB and AES/EBU outputs simultaneously-- one to a DAC and the other to a digital recorder.
Hi, I'm interested to buy a Terminator. Is there anyone.in the UK who has bought one from Singapore and imported it into the UK?
If so, may I ask how much Import Fees and Customs rates were paid? Obviously I know.The VAT fee but would like to gain solid info for UK importation.
Many thanks.
Terminator update.

First, the not so good: In an earlier post I stated I had sent the unit back for transformer hum. I’ve seen at least one other posting regarding the same. There was still a very slight hum when returned to me. I agree with the prior poster that this really is not acceptable for a flagship product. However, I bought an Emotiva CMX2 DC offset blocker which cured the hum. (There are few, even very expensive, power conditioners designed to eliminate DC offset). Apparently there is some degree of DC offset on my power lines, but the Denafrips was the only component not able to cope with it as nothing else in my system has any transformer hum. One more box to contend with in my system, fortunately I have room to hide it. Something to think about.

As for the sound, for the most part it is amazing! With PCM it’s detailed yet warm with stunning holographic imaging. But...On occasion there is static and a hissing sound similar to what you might experience with extreme clocking/jitter issue. Restarting play usually cures it. I am not sure if this is an issue with the Denafrips or Roon software or my nucleus+. Not quite sure how to trouble shoot that one. Any suggestions are welcome. The fact that it happens, even occasionally, haunts me... “is it happening now at a less audible level? Is the sound right? Could it be better? Is the DAC broken?“ Sometimes the music seems better than others even when I don’t hear the hiss. Just in my head???

As for DSD vs PCM. It’s hard to A/B it by upsampling. When I upsample PCM to DSD the level drops considerably which has a dramatic affect on perceived sound quality. (The opposite happens if I downsample a DSD file to PCM—the level increases) Again, I am not sure if this is a function of the DAC or the Roon software. I have tried to correct for this by adjusting the volume, but don’t seem to be able to get it just right. My very rough impression is the DSD soundstage seems ever so slightly more compressed with less detail. In fact, I have taken to down sampling some DSD material to PCM. On the surface this makes sense, as the magic in the DAC is the R2R where PCM shines.
@73max   Which board are you using in the Terminator (there are three versions now)?

Can you test via another digital cable feed?

Can you test with another server/streamer (other than your Nucleus+) feeding the Terminator?

Have you and Alvin troubleshooted the static/hiss issue?  

I had a 'similar' (intermittent) static/hiss issue which was resolved fully.