2. amps-preamps
  3. 157720-143994

CJ Preamp Teflon Recap

Hello,

Have a Conrad Johnson Premier 16LS preamp.  Power supply went out so I sent in for service.  Have the opportunity to get it Teflon Recapped while its there.  Looking for feedback on sound characteristics and does it make the preamp more marketable if I go to sell it.  One friend said it "updates" the 20 year old preamp so its more on par with mid range preamps offered from CJ today - obviously the newer preamp offer other advancements but at least its upgrading the old preamp.  

Thanks, Troy
troynoel
terry9
2,354 posts
 
I am usually keen on upgrading parts, but:
- teflon can be a little brittle to my ears, although RelCap is least so
- I prefer the sound of tin and styrene or copper and styrene.

That's with an all ESL system.
zavato's avatar
zavato
1,410 posts
 
Where have you sent the pre on for service? To CJ or an indie? 
arcticdeth's avatar
arcticdeth
1,572 posts
 
Once the Teflon caps are warm, may take a couple hundred hours in all honesty, for them to sound they’re best!

 Get the Teflon caps, and give then a while to stabilize 
 
you will thank yourself after a couple months!
nakam
38 posts
 
Go with polypropylene instead of Teflon caps.
cal3713's avatar
cal3713
1,421 posts
 
As stated above, Teflon caps have a sound that you may or may not prefer (as does every cap). I'd take @welcher's advice and call the former CJ tech for professional input.

I personally prefer copper foil (and have duelund caps throughout the system), but haven't listened to the most expensive copper teflons. The vcap odam's are also possible upgrades that have received great reviews and might be worth a shot. They're on my list to try.
More to discover