Measuring line noise and power conditioners

@erik_squires ,

What’s wrong with that?.

Frankly, I heard a substantial improvement in SQ, then I realized I had the meter. It seemed to confirm, In a measurable way, the increase in SQ I was experiencing.

@erik_squires 

You are measuring starting at 20 kHz and going up. That is, these devices START measuring noise at the upper limit of human hearing.

It's hard to imagine noise on your line only affecting one portion of the frequency range.  So in other words if you reduced noise that's being measured above 20khz why wouldn't you expect that same filtering to affect the entire range even in areas that aren't being measured by the meter?  Do they make current filters that reduce noise between 100hz and 1Khz??? (for example)  That makes zero sense to me.

+1 @three_easy_payments,

You said it better than I could.

It’s hard to imagine noise on your line only affecting one portion of the frequency range. So in other words if you reduced noise that’s being measured above 20khz why wouldn’t you expect that same filtering to affect the entire range even in areas that aren’t being measured by the meter?

This problem is kind of a Venn diagram.  A conditioner which starts at 10 kHz will hopefully also clean up 100 kHz.  A  conditioner which starts working at 100 kHz won't necessarily clean up 10 kHz.

Of course, coupling can occur later, and there will be a frequency high enough that it stops working at too.

So, you have a meter which measures RFI, which shows reduced noise, and the power conditioner happened to reduce noise in the audible spectrum too.  That's luck.

Before I got my Audioquest Niagara 1200, I read where a lot of manufacturers of conditioners go for a change in sound, rather than good filtering of AC hash on the line.

But to go so far as to discredit all makes of power conditioners is silly. I haven't personally measured the noise on my lines since installing the Niagara 1200 but I've seen demos online showing the differences with noise sniffers and meters and it works as advertised. 

In fact, it's probably the single biggest gain with a "tweak" I've experienced. I hadn't realized how much filth there was on my incoming AC.

All the best,
Nonoise