2. digital
  3. 1124942256

Behringer DEQ2496 HELP

After reading the raves about this product, I finally bought one along with the matching microphone tonite. Put in my system, eager to try room correction. The first 2 attmepts produced some curves that I wasn't crazy about, but seemed plausioble. Now, all it does is push all the bands above 125 all the way to maximum boost, and all the bands below 125 to maximum cut. When displaying the RTA of the pink noise, there is nop more htan a 15 dB range between the highest and lowest levels on the curve (as if that were small!)Also, one of the primary reasons I bought it was for equalizing low frequency room problems, yet it suggests htat anyuthing below 100Hz not be included in the auto EQ.
Does anyone know why it is coming up with such odd equalization curves, even though it is reading the data, which doesn't look so bad? Also, how bad is the product at low frequencies?
honest1
ecruz
402 posts
 
I've never let it go long enough for the light to come on. I let it run on the "fast" setting for 5 minutes, then switched it to "slow" for another 5 minutes, then just watched it until the bouncing back and forth was minimal and then I stop it. By minimal I mean just a few frequencies going up a notch or two, then down a notch or two.

I can't believe how much clearer the sound is. In my book this is a "must audition" piece.
eldartford
4,262 posts
 
Ecruz...In my experience 5 minutes is way overkill. 30 seconds in FAST mode just about nails it. Then I watch in SLOW mode, probably for another 30 seconds just to be on the safe side, but nothing much changes after the FAST phase.
ecruz
402 posts
 
Just an update. I love this thing. If you haven't tried one yet, do it! It really makes a huge difference. There wasn't a flat response in my room. Every frequency was either up a few db's or down a few db's. I can't believe I thought my system sounded good before. When I bypass the EQ everything sounds muddy and vague. When I turn it back on everything snaps back in to focus. It really is one of those products that you have to hear for yourself.

For the record:
TRL modded Sony 900
TAD-150 pre
McCormack DNA 0.5
Vandersteen 2ce's
Usher interconnects and speaker cable.
PS Audio & Signal Cable power cables
Ag insider logo xs@2x
drubin
3,275 posts
 
Are you having it EQ your system to flat or have you shaped the curve a little?
ecruz
402 posts
 
I did not shape the curve. I set it to flat and then hit "room correction". Should I be tweaking it or is that just personal preference?

The thing that amazes me is that everything is clearer. I had no idea an EQ could make this kind of difference.
More to discover