Streetdaddy...I have been down the RS meter/Rives CD, and with it I could never get the same results two times in a row. Perhaps it is a matter of exactly where you locate the mic or the meter. On the average, the RS meter results agreed with the DEQ2496, but were much more variable. Of course you should not expect agreement down to the last dB. The world is not that exact. I assume that you are using the tracks on the Rives CD which are supposedly corrected for the considerable errors of the RS meter. Also, I have heard that there have been several lots of RS meters, and all may not have the same errors.
Behringer DEQ2496 HELP
After reading the raves about this product, I finally bought one along with the matching microphone tonite. Put in my system, eager to try room correction. The first 2 attmepts produced some curves that I wasn't crazy about, but seemed plausioble. Now, all it does is push all the bands above 125 all the way to maximum boost, and all the bands below 125 to maximum cut. When displaying the RTA of the pink noise, there is nop more htan a 15 dB range between the highest and lowest levels on the curve (as if that were small!)Also, one of the primary reasons I bought it was for equalizing low frequency room problems, yet it suggests htat anyuthing below 100Hz not be included in the auto EQ.
Does anyone know why it is coming up with such odd equalization curves, even though it is reading the data, which doesn't look so bad? Also, how bad is the product at low frequencies?
Does anyone know why it is coming up with such odd equalization curves, even though it is reading the data, which doesn't look so bad? Also, how bad is the product at low frequencies?
- ...
- 136 posts total
- 136 posts total