2. amps-preamps
  3. 159001-144705

PrimaLuna Preamp Upgrade Question

I have owned a PL Evo400 Integrated for the past few months. I love the amp, but am considering diving deeper into separates. I've been eyeing a Primaluna Evo Preamp to hopefully unlock more separation and presence.

I'm curious if anyone has any experience with owning a Primaluna Integrated and then adding a Primaluna Pre Amp using the HT bypass. I understand this is a possibility, but I'm curious of the added benefits and or drawbacks. Is there is a general consensus it would be greatly beneficial, I would eventually sell off the Evo 400 integrated and go full separates. 

If you don't have specific experience with PrimaLuna but have been in a similar situation using a bypass in an integrated I'd also love to hear some feedback. 


128x128j-wall
j-wall's avatar
j-wall OP
358 posts
 
@tablejockey so the p300 you have can handle the PrimaLuna? I was under the impression I would have to move up to the newer P12 (or older P10) to be able to handle the power requirements of my Evo400. 
j-wall's avatar
j-wall OP
358 posts
 
@stereo5 I'm not sure how much noise I have in my system to be honest. I know I should be investing in steady and cleaner power. We're renting so dedicated line isn't an option. I think the wiring in our house needs to be checked because with the house not drawing more than a light you can see the light flicker. Which happens in multiple rooms even with the lowest draw of power.
tablejockey
3,821 posts
 
P300? I have the PP Premier. It was long discontinued, but powerful enough to handle a modest system. I have the HP-essentially the same amp.

Check the listings for a P3/5. They are becoming cheap on the used market. They will handle an modest system with amp.

As mentioned, you might want to look into the dedicated line first. It's an inexpensive(relatively speaking) Just find a legit electrician.
j-wall's avatar
j-wall OP
358 posts
 
@tablejockey ahh my mistake. I put in a call to PS Audio and their thought was a P12 is an entry point for my Evo 400 due to power requirements for their newest series. After reviewing power requirements P5 and P10 should work as well. 

Also, you recommended a dedicated line. A power regenerator couldn't fix the flaws or sag in the power? 
tablejockey
3,821 posts
 
j-wall.

As stereo5 mentions,you may want to consider addressing the overall sonic concerns first before blowing cash here and there.

I'm in the speaker placement/room acoustics camp. I've head those 936's sound great with the PL. Optimal placement of your speakers is a game changer. Spending time with the speaker placement archives may be helpful. What's going on the room is very influential to the speakers presentation.

The speakers should sound close to great out of the box, but they may sound better after a few hours of playtime. Setup is paramount. Are you able to get them out in the room?(4-6ft from the front, 3-4 from the sides)

Since the you're in a rental, the PP or PLC(AQ Niagara)may be a good "finishing touch" for your setup. Not until your ears determine you've placed the speakers in their best position, relative to your situation. 

There are more knowledgeable members with speaker/room interaction you may want to pose speaker  positioning  questions later. 

Trust your ears.
More to discover