Ethernet cable question


OK, at the risk of starting a big debate, I have just a dumb question: I see a lot of post talking about Supra 8 and Wireworld ethernet cables, so are you talking about cables making a direct run from your router? I have Cat 5 run throughout my house by me when our home was built 8 years ago. Everything is finished in the home and my sound room is not real close to where I have my network router/modem. So does the ethernet cable going from the wall to my Node 2i make any difference if inside the wall is only Cat5e?
128x128jmphotography
Thanks flrun, yes it is 5e in the walls. I ran ethernet to all the rooms where I thought we would need it when our home was being built 8 years ago. 

My mistake: " The maximum length you can run Cat5, Cat5e, Cat6 and Cat6a cable is 100 meters or 328 feet. If you require a longer run, you will need to put an active component, such as a router, in-between the signals."
Thought it might be longer length limit.
At less than 300 feet total length you are still good.
Also the number of connection points should be limited for best results.

Best Regards,

R
I believe that the SQ of an Ethernet cable only really matters AFTER a HiFi switch (Bonn N8 on up)
If you have ain't got one don' worry 'bout it.
If you do I'd go with ViaBlue.
https://viablue.de/com/cables_ep7_ethernet_cat6a_t6s_rj45.php
Otherwise a Cat8 from Monoprice will deliver all you can get outta the wall.
basic Cat 5, up to 100Mbps

that's 100,000,000. bits per second. 

how does 40khz translate into bits per second?
You could probably get Cat 6 or 6a patch cable for the same price as 5e, try monoprice. What are you using now? Does it work?