Hello highend666. Granite/Quartz countertops are frequently broken during transportation and installation. Broken bits can be had for very low prices and the shops that have them will cut them for you. I have made seven cabinets out of broken counter tops. You can make the fronts out of any kind of wood product you like, the backs too. Glue the countertop pieces together with construction adhesive or silicone rubber. Heavy, but acoustically inert.
Concrete Audio Speakers...Speaker Enclosures made out of Concrete ?..
Could concrete speaker enclosures give us the most realistic sound ?
https://www.concrete-audio.com//en/#lautsprecher
Not connected with this company in any way
https://www.concrete-audio.com//en/#lautsprecher
Not connected with this company in any way
- ...
- 71 posts total
British audio engineer, Gilbert Briggs, who founded Wharfdale in the late 30's wrote a number of interesting books on "loudspeaker" design. He installed speakers into bricked-in corners in a room - must have had a very supportive partner. My takeaway from one of his books was the use of bonded dissimilar materials so that their natural resonances would tend to cancel each other out. Taking his advice, I glued 12" square sheets of mosaic tiles, then grouted them, on the inside surfaces of my cabinets - enjoyed listening to those speakers for 50 years. Probably for the same reason Wharfdale sold loudspeakers with sand-filled voids in their walls in the 50s. |
kenjit1,013 posts08-12-2020 10:37am How will the speaker shaped by kenjit sound?If I had a speaker company my speakers would have to be perfect. No ringing or resonances. Just pure music. Me, the dog, the rabbit, and the GOAT, all of our heads, cocked sideways. The chickens didn't though. BOING! NO RESONANCES, either... hum! At least some ok.. Something gotta come out of the front of the speakers, just saying K! ;-) Regards |
Kenjit is wrong concrete. Does not resonate the issiue is weight and ability to ship without damage Jim thiel and paul hales had speakers with cconcreate front baffles Both made great speakers Just got in cast ironand graphite speakers from jern they sound unbelievable http://jernspeakers.com/ 0 cabinet resonanance they sound like 10k speakrs yet cost about 4k Compleately disssapear speed and articulación are. Off the charts when used with a good sub willl embarass a lot of extremely expensive speakers Dave and troy Audio intellect Nj Jern dealers |
I had some Essence speakers in the 80's. Each driver, 5 per side, were mounted to concrete, then finished on the outside with medite, then walnut, except the bottom, woofer. Each speaker housing was separate for time alignment and made a nice pyramid. 10k in '82 was a lot of money, but they sounded fantastic. Before and after speakers were Snell Type A and Quad ESLs. |
- 71 posts total