Good noromance. Just don't sneeze:) Lewm is absolutely correct. For a driver to do its job correctly it has to be held rigidly in space. Any spurious vibration of the driver is distortion. The problem really does not become critical until you get down in the bass frequencies. There are several ways of dealing with this. First would be making the cabinet very heavy and stiff. Second would be spiking the cabinet to a very solid floor and third would be using counterforce design with the woofers. Best would be all three together. Putting springs or foam under loudspeakers is 180 degrees the wrong way to go. There is a huge difference in requirement for a device that is designed to pick up vibrations and a device designed to produce them.Yes! Increasingly, manufacturers are making enclosures out of aluminum billet. And then there's granite, Acora reviewed this month in Absolute Sound. They're designed to stay put. This is also why front baffles are often heroically over-engineered. And what if the springs themselves start resonating?
Springs under turntable
I picked up a set of springs for $35 on Amazon. I intended to use them under a preamp but one thing led to another and I tried them under the turntable. Now, this is no mean feat. It’s a Garrard 401 in a 60pound 50mm slate plinth. The spring device is interesting. It’s sold under the Nobsound brand and is made up of two 45mm wide solid billets of aluminum endcaps with recesses to fit up to seven small springs. It’s very well made. You can add or remove springs depending on the weight distribution. I had to do this with a level and it only took a few minutes. They look good. I did not fit them for floor isolation as I have concrete. I played a few tracks before fitting, and played the same tracks after fitting. Improvement in bass definition, speed, air, inner detail, more space around instruments, nicer timbre and color. Pleasant surprise for little money.
- ...
- 367 posts total
- 367 posts total