A Couple Little Things I'm Wondering About

See what I mean jcolespeedway, tons of hand waving but not a real technical discussion no matter the expanding number of posts.

One person likes to use the word science a lot but offers no confidence they have any significant background in the related science. One likes to talk about vibrating cables but likely has never done the very easy work of measuring the level of induced signal in a vibrating cable.


I do encourage you to try out cable elevators just get someone else to raise and lower your cables without telling you what they have done.

"1. Why do some folks with usually higher end systems use those cable lifters to keep the cable elevated?"

What else is left for them to do?

2. I bought a bunch of those gold plated caps to cover all the unused RCA jacks on the back of my AVR. I believe they are intended to keep noise down.

Your questions both touch similar benefit.

From what I have seen on pictures, most of the cable elevators are too low.

Cable elevators of proper height help with vacuuming the floor. They have to be high enough that the vacuum cleaner can slide under them.

Covering unused connectors prevents dust from settling there.

I have covers for all the unused connectors. RCA, XLR, USB, 6.3 mm headphones, other (bi-amp) connectors on speakers, unused headphone connectors on Walkmen, etc. Covering only RCAs would be a half-baked approach.

I use rubber/silicon covers which cost a few dollars per bag that will probably cover all the connections you have.

I tried the lifter and the grounding caps....neither worked for my system.  No difference at all