Rule of thumb: if the speaker falls off the stand, you have too much overhang. Also would always recommend heavy metal stand over wood, despite the aesthetic appeal of wood.
How much overhang is ok between a speaker base and the stand top plate?
This thread extends another I posted about "mass loading" stands.
As I mentioned in those threads, I’m choosing speaker stands for my Salk SS 6M speakers. They measure:
20” H x 9 1/8” W x 14 5/16” D
There are many options for speakers stands, but the choice is complicated by the size of the speaker’s width and depth.
Many stands feature a top plate that is 6" x 6" or 6" x 8" or 7" x 7" etc.
On *any* of these top plates, my speaker would hang off the sides and front/back by at at least 2-3 inches.
For example, I’m considering Target stands but am not sure if it’s worth spending good $$ on a stand if there is this amount of overhang.
Seeking opinions about the "overhang" issue between speaker base and stand top plate. How important is this for the sound? How much overhang is too much?
And if it was necessary to have a top plate made locally to go along with the stand, would I just affix it myself? Have it welded on? I didn’t want this to get so complicated.
Thanks for your opinions.
As I mentioned in those threads, I’m choosing speaker stands for my Salk SS 6M speakers. They measure:
20” H x 9 1/8” W x 14 5/16” D
There are many options for speakers stands, but the choice is complicated by the size of the speaker’s width and depth.
Many stands feature a top plate that is 6" x 6" or 6" x 8" or 7" x 7" etc.
On *any* of these top plates, my speaker would hang off the sides and front/back by at at least 2-3 inches.
For example, I’m considering Target stands but am not sure if it’s worth spending good $$ on a stand if there is this amount of overhang.
Seeking opinions about the "overhang" issue between speaker base and stand top plate. How important is this for the sound? How much overhang is too much?
And if it was necessary to have a top plate made locally to go along with the stand, would I just affix it myself? Have it welded on? I didn’t want this to get so complicated.
Thanks for your opinions.
- ...
- 44 posts total
Getting technical, you may want to read a female treatise on the subject as your question does involve a "Parallelogram of forces". However, you’d have to determine the centre of gravity of your particular speakers and THAT, when standing on the supports FIRST! Then read the answer to your question, see below: https://historyofwomenphilosophers.org/chapter-12-of-composite-motion/ Once done add at least some 20% safety margine for your cat, or other possible interference with gravity. And now have fun. PS how to find the centre of gravity for your setup GOOGLE it, eh. M. 🇿🇦 |
- 44 posts total