Who's using Harbeth with tubes, what speaker model and how many watts per channel?

I like where this is going, thank you. Please keep it coming.

correct joe

few things to bear in mind w c7’s or super 5’s

harbeths are 6 ohms, dipping to 5 in 100 hz area roughly - need to use 4 ohm taps not 8 ohms on tube amps - very low powered units, single ended, 300b etc etc need not apply unless you are near-fielding

you have decent sized room... i suggest a tube amp with more beef - i have had great luck w primaluna hp, audio research with 4 power tubes per channel, the like... 70-80 wpc range will move and grip the woofers suitably

compact 7 errs on side of warmth, potential bass boom/muddiness, that is why many who want tube sound use tube linestage or dac for that lil bit of magic but let a very good ss amp do the heavy lifting - hegels pass ayre van alstine all excellent

and yes alan shaw is quite the amp-nazi on his forum - hug is a take it or leave it proposition... i chose the latter - he is a good speaker designer but is close minded somewhat intolerant to alternate views to his own

good luck

I’ve had the C7 and used a Cayin tube integrated at 45 watts per channel. The speakers sounded great, never had to turn the volume beyond 12 o’clock. I now have the SHL5 anniversary. I alternate between the Cayin and a Luxman 505ux @ 100 watts per channel. The speakers are very happy with both amps.

@jjss49 

"harbeths are 6 ohms, dipping to 5 in 100 hz area roughly - need to use 4 ohm taps not 8 ohms on tube amps"

Can you elaborate on this. I've been under the impression that with 6 ohm speakers, the 8 ohm taps were appropriate. Very difficult to AB this.
   

I use SS but someone else on the forum who hasn't chipped in yet uses Linear Tube Audio Zotl40's in monoblock configuration on 40.2A's.