TONEARM DAMPING : DAMPED OR NOT ? ? USELESS ? ? WELCOMED ? ?


Dear friends: This tonearm critical subject sometimes can be controversial for say the least. Some audiophiles swear for non damped tonearms as the FR designs or SAEC or even the SME 3012 that is not very well damped in stock original status.

Some other audiophiles likes good damped tonearms.


In other thread a gentleman posted:


"  If a cartridge is properly matched to the tonearm damping is not required. " and even explained all what we know about the ideal resonance frequency range between tonearm and cartridge ( 8hz to 12hz. ). He refered to this when said: " properly matched to the tonearm ".


In that same thread that a Triplanar tonearm owner posted:


" This is the one thing about the Triplanar that I don't like. I never use the damping trough...... I imagine someone might have a use for it; I removed the troughs on my Triplanars; its nice to imagine that it sounds better for doing so. "


At the other side here it's a very well damped tonearm:


https://audiotraveler.wordpress.com/tag/townshend/


Now, after the LP is in the spining TT platter ( everything the same, including well matched cartridge/tonearm.  ) the must critical issue is what happens once the cartridge stylus tip hits/track the LP grooves modulations.

The ideal is that those groove modulations can pass to the cartridge motor with out any additional kind of developed resonances/vibrations and that the transducer makes its job mantaining the delicated and sensible signal integrity that comes in those recorded groove modulations.

 That is the ideal and could be utopic because all over the process/trip of the cartridge signal between the stylus tip ride and the output at the tonearm cable the signal suffers degradation (  resonances/vibrations/feedback ) mainly developed through all that " long trip " .


So, DAMPING IS NEED IT AT THE TONEARM/HEADSHELL SIDE OR NOT?


I'm trying to find out the " true " about and not looking if what we like it or not like it is rigth or not but what should be about and why of that " should be ".


I invite all of you analog lovers audiophiles to share your points of view in this critical analog audio subject. WHAT DO YOU THINK ABOUT?


Thank's in advance.



Regards and enjoy the MUSIC NOT DISTORTIONS,
R.






Ag insider logo xs@2xrauliruegas
Read what Antinn wrote above.  One of the most intelligent  things written  on the forum  in quite awhile.  The answer is simple.  Listen adjust listen adjust etc...  The theories are all over the place.  Even if you go high dollar, still all over the place.  And beyond  that I believe  most people buy what they like, not necessarily what  sounds real.  Even more why you need to listen,  not look at the scope,  equation  work sheet,  or the worst  listen to someone's  hypothesis as it was gospel.

The other thing which Antinn wrote was having more than 1 table and arms for various types of music.   Also carts come into play and the recordings.  There are trade offs in everything on this planet.  You have to determine  what you want and then listen tweak listen tweak etc...

Enjoy the ride
Tom
When the sound closes down then it is to much damping.When i had tonearms with damping trow i used as little fluid just so it touched the paddle.Hope this helps.
Dear @bdp24  : No, it does not exist yet any other tonearm in the market as the Max great idea. Good that you own it from some years now because you know for sure what I'm talking with the critical tonearm damping subject.

R.
Dear @jjss49  : "  maybe my mind is imagining that... but i do believe the sq difference is there...""

Certainly is not your imagination, it's a fact. Adequated tonearm damping always improves quality level performance in any cartridge signal we are listening.

R.