That's a strange problem. It is definitely limited to the Pioneer Servo/Transport though. The W301 talks to the transport by taping into the IR communication line as if it were a remote control. The display is directly connected to the Pioneer servo board. In other words, Wadia doesn't really do anything fancy to control the transport or the primary display in the W301. My advice is to send the player and the CD in question to the factory and let them have a look.
Wadia 301 disc read error
My Wadia 301 is not reading some of the cd's properly. I get a "04" on the display. If I press play it plays the entire disc but I've no control. Other than the STOP button, nothing else works either on the player buttons or the Remote.
I've emailed Wadia and they told me that it could be laser, so after consulting with GNSC, I've the laser replaced by Steve at GNSC but it did not fix the problem.
The interesting thing is that if I copy the cd which 301 have issue into a cd-r using EAC or any cd copying software, the player plays the cd fine, no error, everything works just fine.
Anyone have encountered this problem or know anything about this ?
I've emailed Wadia and they told me that it could be laser, so after consulting with GNSC, I've the laser replaced by Steve at GNSC but it did not fix the problem.
The interesting thing is that if I copy the cd which 301 have issue into a cd-r using EAC or any cd copying software, the player plays the cd fine, no error, everything works just fine.
Anyone have encountered this problem or know anything about this ?
- ...
- 10 posts total
- 10 posts total