Miracles in Audio, by luck, by good choices,by design or by tweaking...

UPDATE:

The 9 copper bowls boxes plate is now not simply but now connected to 5 Schumann generators ...

I added 2 cabled new connections to the last 3 one to the S.G. grid...

The result is a more refine audible effect encompassing all S.Q. aspects...

I proove for myself now that passive materials acoustic treatment take charge of the acoustical CONTENT of a room and secondarily of the geometric aspect of the room....
But active acoustical control take charge more of the GEOMETRY of the room and only secondarily of the acoustical content...

( acoustical content is the acoustical properties of the different elements in the room and the materials constituting the room itself, and the geometry of the room is the constraints linked to his particular dimensions and topology)

The passive treatment and the active control work one with another complementarily....

Remember what i call active control is not an electronical device control or a computerized one but an integrated grid of 3 sub-grids connected by cables: a grid of stones, a grid of resonators and a grid of S.G.

You dont need money to upgrade if your basic system is well choosen and good, you neeed to EMBED it in his mechanical, electrical and acoustical working dimensions......


My best to all...

For the last 2 days i made no change, no addition apparently; except however yesterday a small one, very small indeed, i changed the transparent regular scotch tape which was gluing one cable connection from my " bell of bells" to the main Schumann generator of my grid, i changed it for a copper tape, like on all my other S.G. and i changed that because i added 2 days ago a new cable connection from the " 9 copper bowls plate" to this main S.G. and the copper tape is better for keeping in place the 2 cables ends together....


My God! this small minor change was astounding with an increased clarity....


Why?


Because when your audio system is so refined already and rightfully embedded a small change may produce an incredible improvement.... Really i was amazed.... Scotch regular tape versus a few centimer of copper tape..... Even me i was waiting for no audible strong improvement at all.... Imagine my surprize.....


Dear invisible ghosts, friends, and others unknown readers; notice and remember that, ANY modification may begin to be audible in a rightfully embed system and in fact a minor one it seems can reveal an increase of S.Q. out of the world to your ears.... I say that because the improvement was on par with my last devices creation....

I wrote that for the benefit of some of you..... I did not believe it myself at first but it is like it is....Believe it or not....


My road will reach soon his end journey, and i will never probably upgrade any component because what i had now is too good to change it and i will need a LOT of money to do so.....But i dont give a dam for even my dreamed Berning amplifier to beat my Sansui, or the Harbeth speakers to beat my Mission Cyrus, or to the Denafrips top dac to beat my French battery Nos dac :)

I dont give a dam not because i would not do it if i could, but it is only a dream now, no more an urgent necessity at all, and i am afraid, if i did it,  to be disappointed by the diminishing return law.....

The piano dont comes from my speakers now, the piano is in my room, then..... :)

Dont upgrade anything before embedding it rightfully.....

My best to all.....

UPDATE: Your speakers dont like to live with 4 empty ceiling corners....



My thread was sleeping for the last month, but my imagination was not completelt in sleep mode....

I add some rectangular and triangle piece of cardboard covered with aluminium paper to 2 corners of my ceiling room in diagonal opposition, one of my speakers near one of this corner....


Cost: one peanuts or 2...

Acoustic material treatment improvement: very audible increase if the refinement of the higher frequencies in particular...the imaging is increasingly stellar one change after the other.... This addition is no exception....

If your room is too bright adding thick pieces of old rug to the cardbord will do better....


Trust me speakers hate the 4 empty corners of any room....Treating 2 for me was enough to be in heaven one times more....

Am i the only one who play with the waves and do miracles for peanuts?

Merry Christmas to all souls....

I have been using silver 3M tape, 2" wide.
I bought a roll to join some ductwork, to vent a clothes dryer.

I find it is probably thinner and lighter than the copper
tape I was using in audio applications.  I like the way it
"smoothes" sound when applied to different surfaces...

Interesting thanks....

Merry Christmas...