2. speakers
  3. 162538-154953

Do speaker wires matter

I recently was given a pair of Mirage M1 speakers. All highs, mids and lows work but I don’t believe they sound like they should.

The tweeters are not giving the detailed highs. I am not sure if the mids and lows are where they should be.

i am currently using a vintage 2226b Marantz I just had restored. Impedance is 8 ohms and it only puts out 26 wpc. I know these speakers require A much more powerful amp. I’ve done a little research on this.

im wondering if the speakers could not sound as good because of the Marantz and/or also because of the speaker wires I’m currently using. I don’t know what gauge they are. They were given to me as well. Any advice would be greatly appreciated.

i did also find a Mirage technician in Canada who still repairs them if I’ll have to take that route. No turning back now 😊
em2music
missioncoonery
1,237 posts
 
"Never even consider anything less than 92dB. Just cross it off your list. Too many fabulous sounding 95dB+ speakers out there to be killing yourself trying to solve a problem so easily avoided.  "                                                                                      Ok,so we cross off most of the Wilson line,the Vivid line,the Dynaudio line ,the Harbeth line, the Focal line ..on and on and on...thats the dumbest thing I've read on this site in a long time outside of your constant Tekton shill post..give us all a break with this ,please
dekay's avatar
dekay
5,688 posts
 
Since it hasn't been mentioned yet the speakers being dipoles need to be placed fairly far out from the front wall in order to balance the sound.

I would try them 5'-10' out if possible playing around with toe in, maybe even zero toe in.

However, them being too close should not decrease the HF balance (quite the opposite I would think as most of the cancelation would be in the mid/lower frequencies).

DeKay
ebm
9,311 posts
 
Everything matters.
mofojo
2,310 posts
 
"Never even consider anything less than 92dB. Just cross it off your list. Too many fabulous sounding 95dB+ speakers out there to be killing yourself trying to solve a problem so easily avoided.  "

Funny! The few Tekton speakers I've seen the measurements for have been under 92db. Although they are stated to be higher.
three_easy_payments's avatar
three_easy_payments
2,097 posts
 
OP stated he has a 26wpc amp with 8 ohm output impedance. His speakers are 83dB, 6ohm. The speakers are not the best match for sure, as he will benefit from moving to a speaker presenting an easier load. A Tekton 4 ohm speaker wouldn't be my first choice (although it would "work") and I wouldn't want to pair that amp with a speaker designed by someone who claims 8 ohm designs are obsolete anyway.

There is a whole world of 8 ohm speakers with 90dB+ sensitivity to consider based on your sonic tastes.  Don't let anyone try to direct you into just one brand....that only means they have an agenda.  Way too many choices in the market for that ridiculousness.
More to discover