Speaker sensitivity vs SQ


My first thread at AG.

Millercarbon continues to bleat on about the benefits of high sensitivity speakers in not requiring big amplifier watts.
After all, it's true big amplifiers cost big money.  If there were no other factors, he would of course be quite right.

So there must be other factors.  Why don't all speaker manufacturers build exclusively high sensitivity speakers?
In a simple world it ought to be a no-brainer for them to maximise their sales revenue by appealing to a wider market.

But many don't.  And in their specs most are prepared to over-estimate the sensitivity of their speakers, by up to 3-4dB in many cases, in order to encourage purchasers.  Why do they do it?

There must be a problem.  The one that comes to mind is sound quality.  It may be that high sensitivity speakers have inherently poorer sound quality than low sensitivity speakers.  It may be they are more difficult to engineer for high SQ.  There may be aspects of SQ they don't do well.

So what is it please?

128x128clearthinker
Speaker sensitivity has little or nothing to do with sound quality. High or low sensitivity speakers are merely two different paths to same destination. Matched with the proper amplifier, either have the capability to produce satisfying sound quality. Of course, some will do this better than others but there are many variables much more important than a speaker's sensitivity.
Duke - IF you can say, are you 3D printing the waveguide ?

best to you in 2021

Jim
bdp24,

I agree with you about the relative merits of Soundlab electrostatic speakers vs. the Altec Voice of the Theater speaker.  The Altec tonal coloration is way too unnatural for my taste as well.  At one time I considered buying Soundlab speakers.  But, while most of the commercially available compression driver systems suffer from too much tonal issues for my taste, I've heard many custom systems that sound very good; I ended up with such a system.

I feel the same way about many other high efficiency speaker types, such as full range single driver systems.  I ultimately don't like their tonal balance and rough frequency response (notable exceptions are Charney Audio and certain Voxativ models).

I like some systems that use "fullrange" drivers as wide range drivers in multi-way systems.  In some, a woofer supplements the fullrange driver, in others, a tweeter is added on top.  An example is the Soundkaos Model 42 (fullrange driver plus a Raal ribbon tweeer on top).  My favorite system utilizes an old Jensen M10 fieldcoil driver (13" fullrange driver) in an open back cabinet (open baffle) operating full range, but with a first order high pass crossover to a tweeter supplementing the single driver (the system I heard had a Jensen RP 302 tweeter, but, I am told that a Western Electric fieldcoil 597 driver is better).


Pa speakers are much more sensitive than hifi speakers, but produce more ditstortion and do not have the same frequency range. To compensate they require active filtering and subwoofers. Making a sensitive speaker isn't that complicated: a woofer with a stiffer suspension (= less lower frequency) and a compression horn tweeter (= more distortion). A pa speaker with the sensitivity of an average  hifi speaker would require a truck full of amplifiers to achieve the same decibels. That's why in sound reinforcement only the max db level of a speaker is most  important. for each 3 db more, the amplifier power has to be doubled!
@larryi,

You may wanna add Tannoy Canterbury Prestige GR speaker to your list of speakers that has exemplified themselves in achieving excellent tonal balance from a single driver.

The Canterbury’s sports a 15-inch dual concentric single chassis driver that incorporates two separate drive units, integrated into one. If you like, you can further read about the merits of dual concentric driver on Tannoy website. Here I wanted to express briefly, the frequency response from 15” driver is pretty flat throughout the entire audible frequency range. The Canterbury’s are excellent speakers capable of delivering very detailed, integrated, dynamic and warm sound. I also dig their traditional look with exquisite birch plywood cabinetry and champagne gold metalwork :-)