Speaker sensitivity vs SQ


My first thread at AG.

Millercarbon continues to bleat on about the benefits of high sensitivity speakers in not requiring big amplifier watts.
After all, it's true big amplifiers cost big money.  If there were no other factors, he would of course be quite right.

So there must be other factors.  Why don't all speaker manufacturers build exclusively high sensitivity speakers?
In a simple world it ought to be a no-brainer for them to maximise their sales revenue by appealing to a wider market.

But many don't.  And in their specs most are prepared to over-estimate the sensitivity of their speakers, by up to 3-4dB in many cases, in order to encourage purchasers.  Why do they do it?

There must be a problem.  The one that comes to mind is sound quality.  It may be that high sensitivity speakers have inherently poorer sound quality than low sensitivity speakers.  It may be they are more difficult to engineer for high SQ.  There may be aspects of SQ they don't do well.

So what is it please?

128x128clearthinker
1+ ctsooner. The most expensive speakers I have even seen are not efficient at all. The Klipsch Horn is actually a good value in today's market.
@audiokinesis, That makes perfect sense Duke. The radiation of the woofer will narrow down to that of the horn buy 700 Hz. It should work as long as the driver is not colored. The speakers that I have heard that run a 15" woofer that high have been colored. Again the K horn is a good example and I think they moved the lower crossover to 350 Hz from 500 Hz. If you manage to avoid another crossover point that would be great.
@atmasphere, I do not disagree. Thermal compression exists but good drivers take this into account, ventilation, ferrofluid, etc. So, to what degree does this effect the sound we hear at home, at the volumes we listen at. The only drivers I have are subwoofers and with the system going as loud as I'll ever play it they are just loafing along. I would think ESLs would be more limited by mechanical compression than anything else. I'm not sure but I do not think they heat up at all. The transformers certainly stay cold. Transformer saturation might be an issue.

@audio2design, I doubt anyone is going to jamb a tube or class A amp into a speaker enclosure. You can add DSP control to any system. Check out DEQX and Trinnov. The problems with active loudspeakers are, audiophiles tend to shy away from all in one stuff. Right now this market is with equipment like Sonos. Great for TV and background music, not to hot for overall sound quality. The companies that make this stuff and have the horsepower to do it are not interested in audiophiles. Not enough of us. They are marketing to the masses who do not like big speakers, do not want to spend a gazillion dollars on equipment and are not critical listeners.  I also doubt they would ever go near an 8 foot ESL. Amar Bose was a brilliant guy but lets face it, the 901 was not a great speaker. He sold a bunch of them jumpstarting a huge company with lots of horsepower. Look what they make now. How is Meridian doing? You certainly do not see a lot of their systems in the US. Audiophiles have a tendency to be digital and processor phobic. The last thing a died in the wool Vinyl listener wants is a computer in his speaker.
@clearthinker --

I'd agree with poster @ctsooner here. Pro manufacturers, the more or less sole supplier for this segment, have developed and build their high efficiency drivers for decades now, and relative to their size, material use and R&D are actually very fairly priced compared to "hi-fi" drivers in general. Boutique high eff. drivers with AlNiCo magnets or field coils housed in luxuriously finished cabinets and all will always be (much) more steeply priced, though are hardly representative in this context. Fortunately they needn't be that pricy to show the merits of high efficiency designs. 

Largely it comes down to size, sound type and association, I believe; high efficiency speakers are closely related to if not directly derived from the pro sector (certainly driver-wise), a sector audiophilia isn't too comfortable with, and coupled with their sonic imprinting as typically more direct, dense, dynamic and present (also due to their dispersive nature) may not appeal to audiophiles and their more widespread exposure to a "softer," thinner, more laid-back and "reverberative" sound (some even feel the dynamics capabilities of high eff. speakers to be "exaggerated"). I'm sure many regard high eff. designs as more "brute" and lacking subtlety, not least when linked to the pro/studio environment, but it's often very far from the truth (did I mention conjecture?). As if sheer volume wasn't an issue already high eff. into the lower octaves takes some very serious size - there's no noodling around that requirement either - and when most have jumped ship with the high eff. main speakers long ago it's even more rare seeing subs in this category of speakers. 

What's most popular in hi-fi is also a popular narrative, and that's an inertia not easily brought to hold. 
@mijostyn ,

How can you cool the driver voice coil if you need 100 watts to listen to it at normal volume?
Even if you put a dedicated fan it wouldn't help!
In contrast if you need just 5 watt, you don't have this problem even with the most straightforward driver coil design.

Regards,
Alex.

 
Thank you phusis.
If I understand you correctly, you make a new point after 119 posts to this thread:
A large majority of audiophile speaker designs are low efficiency because a large majority of audiophiles don't like some of the sound characteristics of high efficiency speaker designs.  Or, as you say, they think they don't.

If that's correct, I wonder how much the sound characteristics of the puny 10 watt often SET amps that are commonly used to drive high efficiency designs have got to do with it.  Like some of the posters here, I certainly don't like them.  Would they sound different (better?) driven with a high current amp with a big power supply, even if the wick has to be turned a long way down?  They would be under better control, particularly in the bass where most of the problem lies.

@atmasphere --

...  A higher efficiency driver that can make 98dB with 1 watt and is 8 ohms is a different beast altogether. This describes the 15" drivers in my speakers at home and they cost $2000.00 each.

These are field coil-fitted drivers, right? In that presumable case their price, though way above what needs to serve a fitting purpose here, makes a little more sense. 

You can find 15" drivers that cost $200.00. I'd be very interested to learn of a 15" with the same 22Hz free air resonance and 150 watt power handling that cost $200, or even $600.00. Have at it! But I think you'll find that such simply does not exist.

The Electro-Voice DL15W woofer/mids of my pro cinema speakers are 97dB sensitive/8 ohms, have a 21Hz free air resonance, and take 400 watts long term. And there are two of them in each speaker (+ subs). Being they're high-passed below ~85Hz further adds to their power handling. I'm unaware of their price being they're discontinued, but my guess is around $300 retail per driver at the time.