RME ADI-2 direct to amp

Been playing around with the RME for a few hours now. Demo unit so assuming its somewhat broken in if that matters. I started going through my tube pre and it sounded really freakin good. About an hour in I hooked it up direct and so far I believe I prefer it that way. Seemed like everything tightened up and a little more detail. Nothing harsh or digital about it. 
Now need to play around with all the functions. There are a bunch of youtube videos that are a step by step for all the functions. 

About an hour in I hooked it up direct and so far I believe I prefer it that way. Seemed like everything tightened up and a little more detail. Nothing harsh or digital about it.

 Exactly what should happen, more transparent, dynamic, and controlled. Bad recordings maybe less to your liking though.
If any harshness become apparent on good recordings, it’s the fault of the source, amp or speakers, not because your going direct. And that "can" be "band aid" fixed with a preamp in the system that’s less detailed and softens things somewhat.

Cheers George

Had some more time with the RME. Definite upgrade to the Bluesound DAC as expected. Super detailed but natural.
I have done the back and forth with the preamp in and out several times  and it is noticeably better going direct in my system. I do not have a real high end preamp but I would urge everyone to give it a try. 

Next step is to throw out the switch power supply and move to a linear power supply. Many options to chose from which two popular LPS are the Sbooster and Teddy Pardo. I and a few others here have the Teddy Pardo and it made a noticeable improvement being, tighter deeper bass, fully presentation without losing the crystal transparency, wider and deeper stage, and improved PRaT. I don’t get some that say the RME sounds great but it’s weakness is its stage, as in my system, with room treatment and the Teddy Pardo I am blown away by the depth and stage wider than my room... the RME is definitely not closed in but I suspect showing the rest of ones system or a poorly treated room and maybe the lack of the Teddy Pardo with other users.

The RME Engineers are pretty proud of the ADI 2fs claiming in the extensive manual that there is no need to change out the SPS but I and others will strongly agree that is false and I’m guessing they’re just a little too proud of it as is. The Teddy Pardo is affordable and worth ever penny. Strongly recommend. If you opt to stay with the SPS, changing out the power cord does help but you’ll need to get a cable with the C7 plug which there’s many, or as some have suggested getting an adapter if you already have a cable you want to use. Lastly I leave mine on all the time as it does take some time to warm up and at first does sound a little thin or closed in at a cold start but still impressive.

Thanks, I will look into the Teddy power supply. 

So I am running somewhere around -30 on the volume of the RME for normal listening and maybe -16 for occasional loud listening. Am I losing "resolution" bits? I am biamping and each amp has a gain knob. Should I adjust the gain so that I am running higher in the volume range of the RME?

Also the volume goes from -60 to above above 0. Do the positive numbers mean clipping or possible clipping?