2. amps-preamps
  3. 164140-153226

Adcom 555se on a smart strip?

I'm thinking about a used Adcom 555se to power my new Ohm Walsh 4000s as recommended by John and Evan. This amp doesn't have a 12v trigger. My stereo "area" is the living room and the preamp will sit in the built-in cabinets next to the fireplace. I don't really want to put a high powered amp in the cabinet for ventilation reasons, so the basement seems like a good choice (and save space in the cabinets for more LPs). With no 12v trigger to power the amp on/off, I was thinking about having the preamp plugged into the control outlet of a smart power strip, and the amp plugged into one of the switched outlets. This will of course work for powering on, but I'm concerned about powering off. When powering off the preamp which will happen first, will it create a pop sound before the amp gets shut off? 

If this smart strip is a viable way to go in this situation, the used 555se will be a great cost savings. If not, I'll start looking at the Adcom 575se or maybe the Parasound A21+. 

Thanks guys and gals.
keysrawk
thecarpathian's avatar
thecarpathian
4,848 posts
 
I do not know the specifics of your fireplace, but the heat generated from it may be a concern if your cabinets are built into the side of it. Proximity to the fire box and flue should be taken into consideration. Also, if it is a wood burning fireplace, smoke particles, no matter how careful you are, will enter your room, which means potentially entering your gear. Neither scenario is optimum for your equipment.
Thought I’d play Devils Advocate for a minute there. Something you may want to take into consideration.
imhififan's avatar
imhififan
2,212 posts
 
Check this one out

https://www.amazon.com/gp/product/B008SQ8E9M/ref=ask_ql_qh_dp_hza

"Always turn your main amp on last, and turn it off first" to avoid the potentially destructive loud "POP." The RS-4 simply does this automatically, powering all your equipment up or down in the proper sequence, every time. You can independently adjust on and off delay sequence from 1-15 seconds
jasonbourne52's avatar
jasonbourne52
2,863 posts
 
Just put it in the cabinet. That amp doesn't get hot enough to worry about, unlike my Bedini amp!
keysrawk OP
15 posts
 
I like the idea of just letting this amp in the basement idea go and putting it in the cabinet. The fireplace is gas and doesn't heat up anything really well being a vented box, so it's probably just fine.

Another amp (integrated) that Ohm said to take a look at was the Peachtree Nova 300. I could switch gears entirely and go with this class D to really save on space. I've never heard a class D amp and i know it has it's share of haters, but I'm not sure it matters to me since I'm not a critical listener - I move about while the music is playing. I need tone controls though so I could but a Schiit Loki in the loop output it has - but I also need to feed a separate premap for the outdoor speakers with it, so perhaps I can just use a RCA splitter at the loop output to do that (it has preamp out but that's not good for feeding another volume control). I'm assuming the loop output on that unit has a fixed volume like a REC out.

So, now I'm debating the 555se in the cabinet, or switching to the Peachtree Nova 300. This seems to be an ever evolving research project.
oldhvymec
5,101 posts
 
OP it's volume DOWN, or mute the pre amp, then turn off the power amp.

Nord Has some really nice options. Trigger is an option along with rack mount. I love the look and the rev d buffer boards They can use the 2590 PRO sparco opamp. You might want to look anyways.. I have  few of their units, NEVER a problem.. Wonderful sound and you can roll the opamps to change the sound a bit..  12 trigger, and they come with anti pop.

I like the Hypex modules.. NC500 or 1200, both are cool running, powerful and great SQ.

I had to get use to it.. but tone control, made it very easy. I don't leave home without it... :-)

Regards
More to discover