Router Ethernet Cable to Streamer
Cat 8 Ethernet Cable 30 ft, 26AWG Nylon Braided High Speed Heavy Duty ... https://www.amazon.com/dp/B089B2YP77/ref=cm_sw_r_sms_api_glt_fabc_TJA5SW4HNFZ0F14K8WVA
Is it possible to decrease potential electrical noise introduced by the AT&T wifi router with a better router next in the chain? If so, any recommendations? Also, has anyone had success/noticed a discernible difference in SQ by introducing something such as a LAN isolator right before the streaming source? Any constructive feedback or request for additional applicable situational information is welcome. Thanks.
- ...
- 23 posts total
Post removed |
Versions of this discussion can be found on this forum and the recommendations are all over the place so you may want to do a search. Like @ozzy, my longest run (15M) from my router is fiber using TP Link converters and short runs of CAT 8 at the ends. I will add that you should take a look at the LC vs. SC versions of fiber cable and connectors since the LC is quite a bit smaller and just as good for what you are doing, if the size of the cable/connectors matters to you. Also, the dual connectors come apart if you need to route them through small holes. However, the converter jacks must match the cable you use. Last thing, there are more than a few here who believe Ethernet cable is a better option and others who don’t think it matters. |
Hi @mitch2 & @ozzy - Excuse the remedial question to confirm. So Ethernet to TP Link Converter > Fiber > TP Link Converter > smallest run of Ethernet into streamer is what your suggesting? These examples will do? FiberCablesDirect - 8M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC t... https://www.amazon.com/dp/B0099S4UTQ/ref=cm_sw_r_sms_api_glt_fabc_FHVQ80HED9QPNACBKDG6 TP-Link Gigabit SFP to RJ45 Fiber Media Converter, Fiber to Ethe... https://www.amazon.com/dp/B003AVRLZI/ref=cm_sw_r_sms_api_glt_fabc_77JGPDGA30AETW3ZW506?psc=1 |
- 23 posts total