Record Cleaner Advice?

@pindac,
 
If you down loaded the new 2nd Edition of the document Precision Aqueous Cleaning of Vinyl Records, read paragraph XIV.10 and you  have 4 options, try one or try all and listen for which works best for you.

Thank You the Updated 2nd Edition.
I will have to try and understand the equations for the Clean Times for immersion in the Tank.

As a simple solution for a Storage Rack, I have purchased a
Collapsible Bamboo Bread Slicing Guide.
From the images it looks good for the Job.
 

I have the degritter.  It’s awesome but I’m thinking I need an rcm for pre or post.

Hi! When I was looking for a vinyl cleaner, this article helped me a lot https://downhomedigital.net/vinyl/best-record-cleaner/ . 
I crawl Record Doctor VI can safely recommend it, it copes with its task by 10/10

I am almost good to go with my changes being made to Vinyl Cleaning.

Before I go off on this activity.
Can my Math for the Mixtures for the Solutions be assessed for the accuracy.

My 'Cleaned Out' Application Bottles are holding 300ml of Distilled Water. (DiW) when filled to about 85% full.

The Dehyphon LS54 has been worked out using Grams as the 'ml' option seemed impossible to achieve.

The Calculation I used gave Water @    300ml x 0.99802 = 299.40g
299.40g @ 0.025% = 0.075g.
I managed to show a reading of 0.09g of Dehyphon in a Pipette when the Tare for used weighing scale with the Pipette was set to 0.00g.

Does this Calculation I produced seem accurate ? , as there is a small quantity of foam already seen with the mixture produced. 

The Concentrate Cleaner from Amazon Proved a lesser challenge as 13ml, seemed almost on the correct mix for 300ml of (DiW)