The Contour System – Directional Wiring of Audio Parts

The article is not about cables, but about wires and the short single core wire is completely symmetrical if we are about audio signal. Just in case you missed it, the overall point is:
- Every piece of wire is directional.
- The preferred direction can be determined in every circuit of an amplifier.
- Wires directions in signal and AC/DC wiring are arranged systematically in contours.

There are some DIY tips and tricks also.

interesting...thanks for sharing

This should be a good one to follow.

Cable direction. Any bets on how many posts until it unravels?

It depends on what exactly is to be unraveled.

Good work. Directionality is easy to hear, even in stranded cables which you point out are never as clear as solid core. However it is so much work to unsolder and reverse wires I have always just left things alone. With fuses however it has been easy to hear with one way obviously better than another. 

So much so that the first Synergistic Blue fuse I ever tried, I knew within the first minute it was the wrong way! The sound was just as you described, less clear and tonally correct. Reversed, and everything snapped into focus, with incredible detail and beautifully accurate tone and timbre.   

If there is that much difference in the one inch of a fuse, I can only imagine what can be achieved with everything going the right direction. You say you were able to do this all the way down to the level of tube pins and RCA plugs? Incredible! 

That is the one thing missing from this very understated low-key article. If the difference I heard from just one inch of fuse was carried out across every wire in every part of the amp, I have to think the final result would be mind-boggling in ease and clarity, with a truly holographic 3D presentation. Which it better be, for the time it takes to get there!