2. analog
  3. 165517-143488

How would you prioirtize?

I have been following this forum for about a year now and it has definitely helped me improve the sound of my system without much expense.  I now find myself ready to step up and spend some money for the next few steps in my adventure.  I have come up with 4 areas that could help me rise to the next level.  I would like advice on which order you would take these steps.  I have ability to spend $2-$4k every 6-8 months.  
I currently love my system, but I can hear room for improvement.  With the right record, I can turn it up to around 100db and it blows me way.  Other records don't sound so great even at lower volumes.  I know that recordings differ, but the bass gets boomy and the details are lost far too often.  I can't help but feel that with improvements in my system all records would sound much better.  I want to widen that sweet-spot.  BTW I do clean my records, it's not pops, it's the richness, details and bass definition that is off on some recordings over others.

My system so far:
  • Turntable: Thorens TD:150 / original Kugel arm / DL 160 re-tipped by Sound Smith / on springs-maple board-springs.
  • Power: McIntosh MA 8900 / original power cable / orange fuse (it does make a difference)
  • Cable: Blue Jean 12
  • Speakers: Belle Klipsch / ALK Extreme Slope crossovers / Dynamat dampened / on Hardwood sprung floors away from side and back walls / toed-in.  My system has been build around these 70's era speakers.  I am emotionally attached to them, they have a great story.
  • Room:  25' x17' open space and lively / slanted ceilings / 3 windows on one long side / carpets and curtains.  Listening couch is 9' way from speakers, somewhat mid-room.
Below are the items on my list of improvements in no particular order:

  1. Source: a. Replace the arm on the current TT (AMG 9W2 is an easy swap I am told).  b. Replace the whole rig.  I have always wanted to have a Thorens TD-125 and I am in contact with Dave from Vinyl Nirvana.  Besides being the same vintage to my speakers it has a more easily swappable arm-board.  Arms on my list include Audiomod, Origin Live, Groovemaster, SME, Thomas Schick and a few others.  IMPORTANT:  I got ahead of myself and purchased a Sound Smith Zephyr MMIC that I would like to use on the next arm.  It was too good to pass up...
  2. Phono Pre:  I am most interested in Decware and Herron.  Decware would need a Step-up transformer for the Zephyr MMIC
  3. Isolation:  Solidsteel wall shelf for the TT.  Townsend speaker bars for the 18" x 29" base (I don't think they make podiums that big).  I was originally going to put them on Pavers, but I feel that I should go big after hearing reviews on the Townsend ability to isolate. (buy once buy well)
  4. Cables and other items:  Power cords, better speaker cable, other isolation, room treatment.
Thank you for your time and helping me wade through his information.

Eddie
128x128edgyhassle
millercarbon's avatar
millercarbon
12,531 posts
 
this is at the cost of a Broad Soundstage.

The cost is too high. Especially considering you can have it all.

mijostyn's avatar
mijostyn
8,570 posts
 
@chakster , you want to use ceramic tile adhesive for those, use a base trowel to apply the glue and stay 1/2" away from the edges. You will be able to adjust them a little once they are on the wall and the adhesive has enough body so they will not move or fall off whole they are drying. Otherwise excellent advice. You have to know what you are dealing with before you deal with it!
chakster's avatar
chakster
6,144 posts
 
Vicoustic supply their own glue for the panels.
Some of them can be glued with liquid nails, some of them are not.

I’m searching for the right glue which is safe for acoustic foam (on the back of the panels). Those panels may look like concrete, but it’s just light weigh acoustic foam in fabric. Still can’t decide on the pattern, so many combinations, here is the latest one.
More to discover