2. speakers
  3. 165599-159914

Dali Spector 6

Hello,i read so much that i am very confused!I have an amp,Marantz SR 4021 and i would like to put Dali spector 6 on it!
Dali specs are 30 - 150 Watt at 6 ohmThe official amp site says 2x80W at 8 ohms  and 2x100W at 6 ohms,but in the back of the amp i saw this :

SYSTEM 1: 4-16 OHMS
SYSTEM 2: 4-16 OHMS
SYSTEM 1+2: 8-16 OHMS
So i am not sure!Is this going to cause me problems at the speakers or the amp?

Thank you
papakos
papakos OP
2 posts
 
Yes,only this pair,nothing else 
papakos OP
2 posts
 
but will i lose from speaker's power?are they gonna give all they have? i never really listen to high volumes
yogiboy's avatar
yogiboy
5,697 posts
 
You will have 100 watts with a 6 ohm speaker compared to 80 watts with a 8 ohm speaker. You will be in good shape with that combo!
erik_squires
16,114 posts
 
The Amp site is stating the power at different impedances which helps show how stiff an amp it is.  Ideally it doubles power as impedance halves.


The back is telling you the range of impedance that is safe to use. If you use 1 pair of speakers, you may use 4 Ohms or higher.

If you use 2 pairs at once, you must use 8 Ohm or higher speakers.
More to discover