30 foot long Balanced Cables to Balanced/RCA Adapters into Amp's Stereo RCA inputs?

Little long in the tooth for a single ended run. The XLRs will get you there BUT delivering a signal with everything it collects along the way. Does that make good sense? NOW if you had an amp that had balanced inputs.

I’ve seen a few RCAs at 20 plus feet for subs and few other things.. It CAN work, you just need to be aware they can pick up noise.. Signal loss on the other end of single ended cable.. Roll off, ay..

I think there is a way to modify the run to work better by using a shielded cable construct in leu of the noise canceling hot/cold. There is more than one way to reduce EFI, RFI. Roll off is a different story.. Suppose to be a GOOD source right?

Regards

thanks everyone,

I finally understood a simple XLR/rca adapter defeats the advantage of using Balanced,

so, it's balanced for 35 lf

into this conversion box, which maintains the advantage of balanced for the long run.

https://www.amazon.com/gp/product/B003S7T49K/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

last 5 lf rca out of the clearboxproto to amp's rca in

btw,

I had to choose between 22 awg OFC

or 16 awg Pure Copper

considering the 35 ft length, I chose 16 awg pure copper.

I read somewhere that the % of purity between Pure and OFC is very slight, the difference in conductivity hard to measure actually; whereas I would think, the difference in conductivity 16 awg to 22 awg is definitely measurable at 35 lf.

interconnects; speaker wires (16 lf 13 awg/leg); speaker wire spades are all OFC

speakers are horns/15" woofers, 16 ohms from 1958, efficiency over 100; amp has 16 ohm taps.

cayin tube amp is 45 wpc, so volume should not be an issue, noise free and modification to frequency response the culprits to listen for.

under the floor there is no machinery, I will see if/how many electrical feeds to nearby wall outlets I cross. Original to 2 wall outlets BX; 1 new 15 amp sep ckt for the amp is ROMEX I presume

@elliottbnewcombjr that ART CLEANBox Pro you linked to will work but it will also introduce distortion.

From the specs (read this from the perspective of what is introduced at a minimum):

• Frequency Response: 20Hz to 20kHz, +/-1 dB
  
• Total Harmonic Distortion: <0.1% @ 1 kHz

nekoaudio

Thanks for the info.

This whole thing is going to be: fun/informative/PITA. I already pity my knees, back, brain, ears, and relationship after I send Donna into the crawl space. I am lucky, she loves me, music, has been there all the way for 31 years. Without hesitation: "Get It". When she want's shoes, I remember that, simply say: "Do you NEED them?" 

I decided,

1. hook to Video system to see the menu
2. factory reset
3. firmware update.
a. do not watch or listen in video system yet.
4. move to music system, direct to Cayin Integrated Amp
a. compare to existing Sony Carousel (repeat, don’t laugh yet)
Cassandra Wilson; Sophie Milman; Nina Simone; Santana; Euthrymics; Friday Night 3 guitarists; Meeting by the River; Blue Nile; Micky Hart; WAR ...
5. move back to Home Theater for music dvd shootout:
a. James Taylor Live at the Beacon, early 5.1, very well done,
https://www.amazon.com/James-Taylor-Live-Beacon-Theatre/dp/1573300934
b. Sophie Milman Live In Montreal (wish I’d been there)
https://www.amazon.com/Sophie-Milman-Live-Montreal/dp/B001EGG5RG
c. then, Jurassic Park, hear the rope slap the water in the beginning, move on from there

IF the Oppo beats my existing Sony Blu-Ray then I HAVE to try leaving it there and the long run to the music system. Simply HAVE to.

Oppo, long run: still beat the Sony Carousel? Any perceived .....?

NOW, FINALLY: return the ART clearboxpro for better transition box like you and Ralph suggest is better?