btw,
I had to choose between 22 awg OFC
or 16 awg Pure Copper
considering the 35 ft length, I chose 16 awg pure copper.
I read somewhere that the % of purity between Pure and OFC is very slight, the difference in conductivity hard to measure actually; whereas I would think, the difference in conductivity 16 awg to 22 awg is definitely measurable at 35 lf.
interconnects; speaker wires (16 lf 13 awg/leg); speaker wire spades are all OFC
speakers are horns/15" woofers, 16 ohms from 1958, efficiency over 100; amp has 16 ohm taps.
cayin tube amp is 45 wpc, so volume should not be an issue, noise free and modification to frequency response the culprits to listen for.
under the floor there is no machinery, I will see if/how many electrical feeds to nearby wall outlets I cross. Original to 2 wall outlets BX; 1 new 15 amp sep ckt for the amp is ROMEX I presume
I had to choose between 22 awg OFC
or 16 awg Pure Copper
considering the 35 ft length, I chose 16 awg pure copper.
I read somewhere that the % of purity between Pure and OFC is very slight, the difference in conductivity hard to measure actually; whereas I would think, the difference in conductivity 16 awg to 22 awg is definitely measurable at 35 lf.
interconnects; speaker wires (16 lf 13 awg/leg); speaker wire spades are all OFC
speakers are horns/15" woofers, 16 ohms from 1958, efficiency over 100; amp has 16 ohm taps.
cayin tube amp is 45 wpc, so volume should not be an issue, noise free and modification to frequency response the culprits to listen for.
under the floor there is no machinery, I will see if/how many electrical feeds to nearby wall outlets I cross. Original to 2 wall outlets BX; 1 new 15 amp sep ckt for the amp is ROMEX I presume