48K, 96K or 192K

Tvad wrote: "Perhaps the setting needs to be made on a disc-to-disc basis? My Donald Fagen disc specifically mentions 48khz/24bit. I don't own any other DVD-A discs to compare.
I personally prefer to not upsample."
Who said anything about upsampling? Setting the permissible bandwidth of the digital output is something different from setting upsampling options. If you open the window to 24/192, 24/48 and 24/96 will pass equally well.

Kal

Well, the reason for limiting the output bandwidth is to account for whether or not the device receiving the output can handle it. If you send a 24/192 signal to a DAC or receiver which can only handle 24/48, the extra bits would be truncated producing a nasty sound.

Yes, he did mention that it is an upconverting player but I took his questions all to do with the digital output. Since we do not know exactly which player it is, I cannot be certain but I suspect the upconverting is available from the analog outputs and pertains, primarily, to CD sources.

Kal

Thanks for the responses, guys. Of course, I didn't mean the front two channels went straight into the Xda. I have an odd setup. For serious listening, I use the analogue outs (stereo "mixed" on the player) that go into a Pass Labs X1 preamp, which feeds into the Xda. For DVD, video goes to the TV via a DVI output, and the audio is passed via a toslink cable to the B&K DVD input. For DVDA, I am taking the 5.1 out of the back of the player and into the DVDA input on the B&K, which I assume is analogue as these are RCA connectors. The front two channels of everything put out by the B&K passes through a bypass input on the Pass Labs unit so that when in DVD or DVDA mode, the B&K controls volume rather than the Pass.

It sounds like I need to find out what the B&K procesor is the happiest with, and then set the output on the DVD player to match, right?

Thanks.

Jim