Just add little more NPS 1260 to my system and once again it made me smile. The sound just keeps getting better.
Snake oil??
Well, on March 8th, at the age of 64, I suffered a mild stroke. I have felt that things were returning to normal for the last few weeks. Now I’m not so sure. I just reviewed an email that came to me from Agon about a mysterious substance involving something called 3-Dimensional Enhancer, the NPS 1260. It claims to cure literally all my audio problems for the low price of $599. Is this some leftover April Fools thing or am I having some sort of stroke relapse? I’m hoping that MC has some form to sage advice for this conundrum.
- ...
- 102 posts total
Have now applied Madscientistadio.com’s Graphene Contact Enhancer with great results. I started with Caig Deoxit Gold, moved on to Acoustic Revive ECI-50 spray and now applied the above to the same contacts. In each step there was a clear improvement: it manifests itself in a perceived pickup of music‘s rhythm and pace. There is perception of better dynamics and clarity along with a reduction of graininess and sibilance, everything appears more immediate and less forced. The Madscientist Audio material needs to be applied in small quantities: when I put too much on the RJ45 connector to the router, the signal stopped until I removed most of it. Compared to the Acoustic Revive, the effect was greatest when treating fuses and mains leads. Highly recommended. |
Master M, Check it out.. I would PM you but it will delete the address. I've added just water, and just 3 in one oil mixed to a paste. I dried my stuff with a heat gun. The water based worked GREAT if you didn't remove the artifact and reinstall or reverse the direction in the case of a fuse or breaker. The 3 in one worked better. You can make a QUART of enhancer for 22.00 usd. Sell your goodies for 35.00 a tiny bottle and FUND a 50,000.00 stereo system.. Who says we can't think BIG.. That 22.00 will make that much enhancer.. I bought 4 10 ounce bags 10 years ago for 120. usd Enough for 5-7 GALLONS.. I've also used Nuclear Never Seize and added about 1/4 to the amount being mixed. 1/4 dust, 3/4 NNS, mix and thin with 3 in ONE, one drop at a time.. SEE I share.. Because the effect of graphene as a SUPER conductor requires a single layer to achieve 1000% conductivity increase, I'll settle for 100% plus if I can get it by applying the product below.. Think THIN... OK Master M., that will being your system up to 522.00 plus the cost of 3 in ONE.. I had some laying around.. :-) <<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>> 2 items 2.2.oz each 100 % conductive carbon Graphene powder : Extra Fine https://www.ebay.com/itm/153433640674 <<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>> To all the naysayers.. 22.00 usd. My gift to you... Enjoy.. MOCK if you must... BUT it works pretty darn good.. Dip a bare wire in it, install the wire into the barrel of the terminal and 20-50 tons from a press OR a single hammer strike to set the terminal to the cable end and a second one to WELD the two.. You can't get better contact.. I use an old speedo cable dye and a 6 pounder. Don't hit it a THIRD time, that will loosen it.. 20-30 ton hammer strike, YUP... Regards |
All I can say is that NPS-1260 does work as advertised. I don’t know how and frankly I don’t care. But the proof is in the listening. The sound is less harsh/strident, not that it was actually “harsh” at all before the application. Is it less distortion? What I do know is that the soundstage is more present, solid and palpable. I’m happy to have come across it and intend to use more of it on my other systems. Snake oil? Hardly, but then again you can’t convince those whose minds are made up. |
- 102 posts total